958-000289-001, June 2003)

Installing and Configuring the Director 2/64

83Director 2/64 Installation Guide

Figure 38: Hardware View page (with FRU failures)

Set Director Date and Time

The Director 2/64 Product Manager log entries are stamped with the date and time

received from the director. Use these steps to set the effective date and time for

the director:

Note: The director and HAFM synchronize at least once daily.

1. At the Hardware View page for the selected director, click the Configure

menu.

2. Choose Date/Time from the drop-down menu. The Configure Date and

Time dialog box displays, as shown in Figure 39.