FW 05.01.00 and SW 07.01.00 Director Release Notes (AA-RTDVC-TE/958-000276-003, June 2003)

Important Information
15Director Release Notes
Table 2: Zoning Parameters Supported Limits
Note: The supported number of zones is based on a zone name with a maximum of
32 characters. On all edge switches and directors except the Director 2/140, the
maximum number of zones decreases if full 64 character names are used. The
supported limits are based on two members per zone.
Zone set sizes are affected by the number of zones in the zone set, the length of
each zone name, the number of members in each zone, and the Interoperability
mode of the fabric. Please consult with HP Professional Services or your support
representative if you have questions regarding specific zone set configurations.
Using the Same Firmware
All switches and directors in the same fabric should have the same firmware level
installed—whether 1 Gbps or 2 Gbps capable.
Reinstalling Feature Licenses
Feature Licenses (or keys) must be reinstalled after performing a factory reset on a
director to regain use of the licensed features (e.g., SANtegrity Binding).
Zoning Parameter Maximum Value
Number of end ports 1024
Unique zone members 1024
Members per zone 1024
Zones 1024
Number of zone sets 64
Maximum devices supported 1024