FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

HAFM Server Diagnostics
128 HA-Fabric Manager Server Installation Guide
MAP 0800: Server Hardware Problem Determination
Substitute the following MAP steps for the one described in MAP 0800: Server
Hardware Problem Determination in Director and Edge Switch service guides:
■ Step 3
■ Step 4
■ Step 6
■ Step 7
■ Step 8
■ Step 9
3
Reboot the HAFM server.
1. At the Windows 2000 desktop, click Start at the left side of the task bar
(bottom of the desktop), then select Shut Down. The Shut Down Windows
dialog box displays.
2. Select the Shut Down option from the list box and click OK. The HAFM
server powers down.
3. Wait approximately 30 seconds and press the power button on the liquid
crystal display (LCD) panel to power on the server and perform power-on
self-tests (POSTs). During POSTs:
a. The green LCD panel illuminates.
b. The green hard disk drive (HDD) LED blinks momentarily, and processor
speed and random-access memory information display momentarily at the
LCD panel.
c. After a few seconds, the LCD panel displays the following message
pertaining to boot sequence selection (Figure 92):
Figure 92: LCD panel during boot sequence
Boot from LAN?
Press <Enter>