FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Initial Setup
21HA-Fabric Manager Server Installation Guide
Verify Installation Requirements
Verify the following requirements are met prior to HAFM server installation.
Ensure that:
■ HP recommends that a site plan is prepared, configuration planning tasks are
completed, planning considerations are evaluated, and related planning
checklists are completed.
■ Fabric and device connectivity are evaluated, and the related planning
worksheet is complete. Refer to the HP StorageWorks SAN High Availability
Planning Guide.
■ A browser-capable PC and LAN segment connectivity to the HAFM server to
support switch management through the HAFM application is available.
■ Support equipment and technical personnel are available for the installation.
■ A customer-supplied 19-inch equipment rack and associated hardware are
available (optional).
Unpack and Inspect the HAFM Server
Unpack, inspect, and install the HAFM server as follows:
1. Inspect the shipping container for damage caused during transit. If a container
is damaged, ensure a representative from the freight carrier is present when
the container is opened.
2. Unpack the shipping container and inspect each item for damage. Ensure the
packaged items correspond to the items listed on the enclosed bill of
materials.
3. If any items are damaged or missing, contact a Hewlett-Packard authorized
service provider or reseller.
4. Perform one of the following:
■ For a desktop installation, position the HAFM server on a table or desktop
as directed by the customer. Ensure a grounded AC electrical outlet is
available.
■ For a cabinet installation, open the rack-mount kit and inspect the
contents. Refer to the enclosed bill of materials and verify all parts are
delivered.