FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Initial Setup
23HA-Fabric Manager Server Installation Guide
2. If required, connect the HAFM server to the customer-supplied Ethernet LAN
segment or HP-supplied Ethernet hub (private LAN interface). To connect the
HAFM server:
a. As shown in Figure 3, connect one end of the Ethernet patch cable
(supplied with the HAFM server) to the right RJ-45 adapter (LAN 2) at
the rear of the server.
b. Connect the remaining end of the Ethernet cable to the LAN as follows:
— If the HAFM server is installed on a customer-supplied LAN
segment, connect the cable to the LAN as directed by the customer’s
network administrator.
— If the HAFM server is installed on the HP-supplied Ethernet hub,
connect the cable to any available hub port.
3. As shown in Figure 3, connect the phone cord to the left RJ-11 adapter
(LINE) at the rear of the server and to a facility telephone connection.