FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
44 HA-Fabric Manager Server Installation Guide
5. If required, change the name from the default of HAFMSERVER to another
name in the Computer Name field.
6. If required, change the name in the Workgroup field to WORKGROUP (or
another name).
7. Click OK. The dialog box closes.
8. Record the computer and workgroup names for reference if the HAFM server
hard drive fails and must be restored.
9. At the System Properties dialog box, click OK to close the dialog box and
return to the Control Panel window.
10. Click close (X) at the upper right corner of the Control Panel window to
return to the Windows 2000 desktop.
Configure Gateway and DNS Server Addresses
Note: These settings were configured using the LCD panel during the initial setup
described in “Configure Public LAN Addresses” on page 28 and “Configure Private
LAN Addresses” on page 33.
This section describes how to configure or verify gateway IP addresses and DNS
server IP addresses for the public LAN connection (LAN 1) and optional private
LAN connection (LAN 2) using Windows 2000 dialog boxes:
1. At the Windows 2000 desktop, click Start at the left side of the task bar, then
choose Settings, then Control Panel. The Control Panel window displays
(Figure 42 on page 42).
2. Double-click the Network and Dial-up Connections icon. The Network
and Dial-up Connections window displays (Figure 45).