FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
47HA-Fabric Manager Server Installation Guide
6. The Use the following IP address radio button is enabled and the IP address
and Subnet mask fields display network information configured while
performing “Configure HAFM Server Password and Network Addresses” on
page 26.
7. At the Default gateway field, enter the gateway address obtained from the
customer’s network administrator.
8. Click (enable) the Use the following DNS server addresses radio button. At
the Preferred DNS server field, enter the DNS server IP address obtained
from the customer’s network administrator, then click OK to apply the
changes and close the dialog box.
9. Click OK to close the Local Area Connection 1 Properties dialog box.
10. Record the changed gateway and DNS server addresses for reference if the
HAFM server hard drive fails and must be restored.
11. To configure addresses for the private LAN connection (LAN 2), double-click
the Local Area Connection 2 icon and repeat step 3 through step 10 of this
procedure.
12. Click close (X) at the upper right corner of the Network and Dial-up
Connections window to return to the Windows 2000 desktop.
13. Reboot the HAFM server:
a. At the Windows 2000 desktop, click Start at the left side of the task bar,
then choose Shut down. The Shut Down Windows dialog box displays.
b. At the Shut Down Windows dialog box, choose the Restart option and
click OK to reboot the server.
c. Perform the steps described in “Access the HAFM Server Desktop” on
page 38.