FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
59HA-Fabric Manager Server Installation Guide
Configure Call Home
To configure the call-home feature:
1. There are two jacks on the HAFM server’s internal modem: one for the
call-home connection (LINE), and the other for a telephone (PHONE). Ensure
a telephone cable is routed and connected to the LINE jack at the rear of the
HAFM server (connected while performing “Connect the HAFM Server” on
page 22).
2. At the Windows 2000 desktop, double-click the Call-Home Setup icon. The
Network and Dial-up Connections - CallHome.pbk dialog box displays
(Figure 59).
Figure 59: Network and Dial-up Connections - CallHome.pbk dialog box
3. Ensure the Primary Support Center selection displays at the Choose a
network connection list box, then click Properties. The Primary Support
Center dialog box displays (Figure 60).
Figure 60: Primary Support Center dialog box