FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Configuration
66 HA-Fabric Manager Server Installation Guide
3. Replace the default text with the following entries:
■ Name - Enter a name for this Director or Edge Switch as appropriate for
your SAN. Click Set Name As Nickname, which will display a check
mark in the box. This will be the name that will be displayed with the icon
for this Director or Edge Switch in the HAFM Product View and Fabric
View displays.
■ Description - Enter the address of your installation.
■ Location - Enter the WFM Site ID and Super Region code, as obtained
in “Obtain Required Information” on page 58. Separate each item with a
“~” character, as shown in the following example:
US1234567890~AA
■ Contact - Enter the contact name, phone number, and company name
exactly as provided to HP in “Obtain Required Information” on page 58,
separated by “~” (tilde) characters, as follows:
FirstName~LastName~PhoneNumber~CompanyName
For example:
Joe~Smith~5085551515~ABCCompany
4. Click Activate.
The Configure Identification dialog box closes and the Product Manager
window at the Hardware View for this device is still displayed.
5. On the menu bar, select Maintenance > Enable Call Home Notification.
6. Place a check mark in the Enable Call Home Event Notification option.
7. See “Test Remote Notification” on page 72 for instructions on testing the
call-home feature.