FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Backup and Restore
81HA-Fabric Manager Server Installation Guide
Figure 75: InCD icon (formatted CD)
2. Back up the switch configuration file to the HAFM server.
a. Select Backup and Restore Configuration from the Maintenance menu
on the menu bar to display the Backup and Restore Configuration
dialog box.
Figure 76: Backup and Restore dialog box
The Backup and Restore dialog box consists of a short description of the
features performed when you select Backup or Restore.
Following is a list of configurations that are backed up to the HAFM server:
■ Identification data (switch name, description, and location).
■ Port configuration data (port names, blocked states, and extended distance
settings).
■ Operating parameters for fabric (E_D_TOV, R_A_TOV, switch priority,
interop mode) and for switch (preferred domain ID, rerouting delay, and
domain RSCNs).
■ SNMP configuration (trap recipients, community names, and write
authorizations).
■ Zoning configuration (active zone set and default zone state).
b. To backup data, click Backup.
c. When the dialog box displays confirming that the backup of configuration
is complete, click OK.
If the backup fails, a dialog box displays to inform you that the backup to
the server failed.