FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Backup and Restore
85HA-Fabric Manager Server Installation Guide
■ Windows 2000 configuration information – Windows 2000 network
addresses, date and time information, user information, and the product
identification are recorded during installation of the HAFM server. Refer to
“Record or Verify HAFM Server Restore Information” on page 77 for
information.
Procedure
To restore the rack-mount HAFM server:
1. At the front of the HAFM server, press the left edge (PUSH label) of the LCD
panel to disengage the panel and expose the CD-RW drive.
2. Insert the HAFM Server Restore CD-ROM in the CD-RW drive and close the
LCD panel.
Note: This procedure deletes all data from the C: hard drive partition.
3. Press the power button. The HAFM server powers on and performs the restore
process from the CD-ROM.
4. After the restore process completes, the HAFM server makes an audible series
of beeps. Remove the HAFM Server Restore CD from the CD-RW drive.
5. Power cycle the HAFM server. The HAFM server performs power-on
self-tests (POSTs). After successful POST completion, the LCD panel
displays a Welcome!! message, then continuously cycles through and
displays server operational information.
6. Configure the following parameters at the server’s LCD panel. Refer to
“Configure HAFM Server Password and Network Addresses” on page 26 for
instructions.
■ LCD panel password.
■ IP address for private and public LAN connections.
■ Subnet mask or private and public LAN connections.
■ Gateway address
■ DNS server address
7. Log on to the HAFM server’s Windows 2000 desktop through a LAN
connection to a browser-capable PC. Refer to “Access the HAFM Server
Desktop” on page 38 for instructions.