FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager Server Installation Guide

Backup and Restore
86 HA-Fabric Manager Server Installation Guide
8. Configure Windows 2000 configuration information:
■ Configure the computer name and workgroup name for the HAFM server.
If required, change the server’s gateway addresses and DNS server IP
addresses to conform to the customer’s LAN addressing scheme. Refer to
“Configure HAFM Server Information” on page 38 for instructions.
■ Change the default Windows 2000 administrator password and configure
password access for authorized users. Refer to “Configure Windows 2000
Users” on page 48 for instructions.
■ Set the HAFM server’s date and time. Refer to “Set HAFM Server Date
and Time” on page 55 for instructions.
■ Configure the event notification (call-home and e-mail notification)
features. Refer to “Configure and Enable Event Notification Features” on
page 57 for instructions.
9. Insert the High Availability Management Applications CD-ROM in the
CD-RW drive and close the LCD panel.
10. At the HAFM server’s Windows 2000 desktop, click Start at the left side of
the task bar, then select the Run option. The Run dialog box displays.
11. At the Run dialog box, type D:\hpServerInstall in the Open field.
12. Click OK. A series of message boxes appear as the InstallAnywhere
third-party application prepares to install the HAFM software, followed by
the HP High Availability Fabric Management Applications dialog box.
13. Follow the online instructions for the InstallAnywhere program. Click Next,
Install, or Done as appropriate.
14. Remove the High Availability Fabric Management Applications CD-ROM
from the CD-RW drive.
15. Insert HAFM data directory backup CD-ROM (created while performing
“Back Up the HAFM Server” on page 80) in the CD-RW drive and close the
LCD panel.
16. Copy the contents of the CD-ROM to the C:\HAFMData directory on the
HAFM server’s hard drive.
17. Power off and reboot the HAFM server.
a. At the Windows 2000 desktop, click Start at the left side of the task bar
(bottom of the desktop), then select Shut Down. The Shut Down
Windows dialog box displays.