user guide hp StorageWorks ha-fabric manager Product Version: FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 Fourth Edition (September 2003) Part Number: AA-RS2CD-TE This guide describes the HP StorageWorks High Availability Fabric Manager (HAFM) and its features. It tells you how to use the HAFM to monitor, configure, and manage the Fibre Channel in which managed products operate. This guide also covers Fabric zoning, HAFM server administration, and HAFM logs.
© Copyright 2001-2003 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
contents Contents About this Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Starting and Stopping HAFM Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HAFM Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Availability Fabric Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . View Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Menu . . . . . . . . . . . . . . .
Contents Zoom In Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zoom Out Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit Topology in View Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Clear ISL Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clear All ISL Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enable Fly-Over Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents View Context Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . View Pop-Up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Show Zone Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Topology View Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fly-Over Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pop-Up Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Icon . . . . . . . . . . . . .
Contents Enable Fly Over Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nicknames. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sessions. . . . . . . . . . . . . .
Contents Active Zone Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zoning Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merging Zoned Fabrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configurations of Merged Zoned Fabrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rules for Merging Zoned Fabrics . . . .
Contents 7 HAFM Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Using Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Sorting Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Button Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Threshold % . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Open Trunking Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 A Information and Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 B Configuring Remote Workstations: Windows Systems. . . . . . . . . . . . . . . . . . . . . . .215 Requirements . . . . . . . . . . . . . . . . .
Contents 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Export Fabric Topology icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Show Zoning Library icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Layout Icons icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 14 Icon display when switch or director added to fabric . . . . . . . . . . . . . . . . . . . . . . . . . . Show Route dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Route displayed in Topology tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 93 94 95 96 97 98 Installing HP HAFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HAFM Installer — Install Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP HAFM page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security Warning page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 16 High Availability Fabric Manager User Guide
about this guide About this Guide This user guide provides information to help you: ■ Use the High Availability Fabric Manager (HAFM) to monitor, configure, and About this Guide manage the Fibre Channel in which managed products operate. ■ Manage Fabric zoning and HAFM logs.
About this Guide Overview This section covers the following topics: ■ Intended Audience ■ Related Documentation ■ Related Documentation Intended Audience This book is intended for use by data center administrators, LAN administrators, operations personnel, and customer support personnel who: ■ Administer user access to the HAFM application. ■ Monitor and manage product operation.
About this Guide Conventions Conventions consist of the following: ■ Document Conventions ■ Text Symbols ■ Equipment Symbols Document Conventions The document conventions included in Table 1 apply in most cases.
About this Guide Caution: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or data. Note: Text set off in this manner presents commentary, sidelights, or interesting points of information. Equipment Symbols The following equipment symbols may be found on hardware for which this guide pertains. They have the following meanings.
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of power. WARNING: To reduce the risk of personal injury from electrical shock, remove all power cords to completely disconnect power from the power supplies and systems. Any product or assembly marked with these symbols indicates that the component exceeds the recommended weight for one individual to handle safely.
About this Guide Getting Help If you still have a question after reading this guide, contact an HP authorized service provider or access our website: http://www.hp.com. HP Technical Support In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a week. Note: For continuous quality improvement, calls may be recorded or monitored. Outside North America, call technical support at the nearest location.
About this Guide HP Authorized Reseller For the name of your nearest HP authorized reseller: ■ In the United States, call 1-800-345-1518 ■ In Canada, call 1-800-263-5868 ■ Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com.
About this Guide 24 High Availability Fabric Manager User Guide
Introduction and General Information 1 This chapter presents an overview of the High Availability Fabric Manager (HAFM). It includes: ■ An introduction to using HAFM. ■ Information on how to access HAFM. Introduction to High Availability Fabric Management The High Availability Fabric Manager (HAFM) is a Java-based graphical user interface (GUI) that enables the user to manage users and products, monitor products, and open Product Managers.
Introduction and General Information Director 2/64 Remote Workstation HAFM Server 1 4 5 8 9 12 13 16 17 HDD MID 20 21 FAN L1 L2 MDIX 24 Port Status 1 2 3 4 5 6 13 14 7 8 Collision 15 16 9 10 17 18 11 12 100M Green 100M, Yellow 19 20 21 22 23 - 10M, Flash 24 10M Activity Baseline 10/100 Hub Power 3C16411 SuperStack ® 3 10/100 Mbps Ethernet Hub 3com ENTER ® Director 2/64 Customer Customer Intranet Intranet (10/100 (10/100 Mbps) Mbps) Remote Workstation Figure 1: Product management opt
Introduction and General Information ■ Management through a PC-based Telnet session using the command line interface (CLI). Any platform that supports Telnet client software can be used. HAFM Server Information The HAFM server provides a central point of control for managed Fibre Channel products. The HAFM server is required for installing, configuring, and managing these products.
Introduction and General Information Figure 2: VNC Authentication Screen 3. Type the password and click OK. The Welcome to Windows dialog box displays (Figure 3). Note: The default TightVNC viewer password is password. Figure 3: Welcome to Windows dialog box 4. Click the Send Ctrl-Alt-Del button at the top of the window to log on to the HAFM Server desktop. The Log On to Windows dialog box displays (Figure 4). Note: Do not simultaneously press the Ctrl, Alt, and Delete keys.
Introduction and General Information Figure 4: Log On to Windows dialog box 5. Type the Windows 2000 user name and password and click OK. The HAFM Server’s Windows 2000 desktop opens and the HAFM Manager Login dialog box displays (Figure 5). Note: The default Windows 2000 user name is Administrator and the default password is password. The user name and password are case-sensitive. 6. In the HAFM Login dialog box (Figure 5), enter your user name and password in the User Name and Password fields.
Introduction and General Information Figure 5: High Availability Fabric Manager Login dialog box 7. In the HAFM Server field, type or choose the HAFM server to which you want to connect. If you are logging in to the local HAFM server, the HAFM server name is localhost. The default address that displays in the HAFM Server field is the address of the last server accessed. Click the HAFM server arrow to see the network addresses of all HAFM servers that were accessed from the computer you are logged into.
Introduction and General Information Figure 6: High Availability Fabric Manager main window 1 2 3 4 5 Menu Bar. For details, refer to Chapter 3 on page 59. Tool Bar. For details, refer to Tool Bar on page 47. View Tabs. For details, refer to Main Panel on page 53. Main Panel. For details, refer to Main Panel on page 53. Status Panel. For details, refer to Status Bar on page 56. Accessing HAFM on the Notebook Server The HAFM application starts automatically when the HAFM server is powered on.
Introduction and General Information Note: If user names have not been established, you can use the default user name (Administrator) and password (password). The user name and password are case-sensitive. HP recommends that you change the default password as soon as possible. To add or modify user names, passwords, and user rights, refer to the appropriate subsections in the “Users” section on page 65. Figure 7: High Availability Fabric Manager Login dialog box 3.
Introduction and General Information 4. Click Login. The main HAFM window displays the Product View (Figure 6). Figure 8: High Availability Fabric Manager main window 1 2 3 4 5 Menu Bar. For details, refer to Chapter 3 on page 57. Tool Bar. For details, refer to Tool Bar on page 45. View Tabs. For details, refer to Main Panel on page 51. Main Panel. For details, refer to Main Panel on page 51. Status Panel. For details, refer to Status Bar on page 54.
Introduction and General Information Accessing Remote HAFM Servers To access remote HAFM servers, enter the server’s network address or DNS host name in the HAFM Login dialog box. If you are already logged in to the HAFM and want to access this dialog box, choose Logout from the Product menu. Figure 9: High Availability Fabric Manager Login dialog box 1. In the HAFM Login dialog box, enter your user name and password.
Introduction and General Information Starting HAFM on Remote Workstations If the HAFM application is not running or the HAFM Login dialog box is not displayed on your remote workstation, you can start the application following appropriate steps for your workstation’s operating system. Starting HAFM on a Windows System To start the HAFM application on a Windows 95, Windows 98, Windows 2000, or Windows NT system: 1. Double-click the HAFM icon on the desktop. The HAFM Login dialog box displays. 2.
Introduction and General Information Starting HAFM on an HP-UX or AIX System To start the HAFM application on an HP-UX or AIX system from the home directory: Note: If you have saved the HAFM application in a different location, type in the appropriate directory names. 1. Type the following in the Terminal window: # cd /home 2. Click Enter. 3. Type the following in the Terminal window: # cd HAFM 4. Click Enter. 5. Type the following in the Terminal window: # ./HAF_Manager & 6. Click Enter.
Introduction and General Information Requirements for Remote Workstations The HAFM is downloaded and installed on user workstations from the HAFM server. The remote workstations can be Windows® 95, Windows 98, Windows 2000, Windows XP, HP-UX, AIX, Linux, or Solaris systems. For the minimum system requirements for remote workstations, refer to the appendix in this guide for the appropriate operating system: ■ Appendix B for Windows. ■ Appendix C for Solaris. ■ Appendix D for HP-UX, AIX, and Linux.
Introduction and General Information The User Sessions dialog box displays active session information in this format: ■ User — The name of the current user (in Figure 10, Administrator). ■ Network Address — The network address of the current user. ■ Connection Established — The date and time that the session was established.
Introduction and General Information High Availability Fabric Manager The following options are available through the HAFM. For more information about these options, refer to Chapter 3.
Introduction and General Information View Menu ■ User Sessions ■ Zoom — In — Out — Default — Fit in View ■ Arrange Icons — By Name — By Severity ■ Layout Icons — Circular — Spring ■ Center in Topology ■ Refresh Topology ■ Clear ISL Alert ■ Clear All ISL Alerts ■ Enable Fly Over Display Configure Menu ■ Users ■ Nicknames ■ Sessions ■ SNMP Agent ■ Activate Zone Set ■ Zoning Library ■ Advanced Zoning — Deactivate Zone Set — Configure Default Zone 40 High Availability Fabric Ma
Introduction and General Information Logs Menu ■ Audit Log ■ Event Log ■ Session Log ■ Product Status Log ■ Fabric Log Maintenance Menu ■ Configure E-Mail ■ Test Remote Notification ■ Configure Ethernet Events ■ Configure Call Home Event Notification Help Menu ■ Contents ■ About Product Manager The following options are available through the Product Manager application for your switch or director.
Introduction and General Information ■ Port (options available when port is selected) — Port Properties — Node Properties — Port Technology — Block Port — Enable Beaconing — Port(s) Diagnostics — Channel Wrap (FICON management style only) — Swap Ports (FICON management style only) — Clear Link Incident Alert(s) — Reset Port — Port Binding — Clear Threshold Alert(s) ■ FRU (options depend on FRU selected) — Open Port Card View (director only) — FRU Properties — Switchover (director only) — Enable Beaconin
Introduction and General Information — Switch Parameters — Fabric Parameters ■ Switch Binding — Change State (only active if SANtegrity Binding is installed) — Edit Membership List (only active if SANtegrity Binding is installed) ■ Ports ■ Addresses (FICON management style only) — Active — Stored ■ SNMP Agent ■ Management Server (only active if a management server feature is installed) ■ Features ■ Date/Time ■ Threshold Alerts ■ Open Trunking (only active if Open Trunking feature is instal
Introduction and General Information ■ IPL ■ Set Online State ■ Firmware Library ■ Enable E-Mail Notification ■ Enable Call Home Notification ■ Backup & Restore Configuration ■ Reset Configuration Help Menu 44 ■ Contents ■ About High Availability Fabric Manager User Guide
Using the HAFM Window 2 This chapter provides a description of the High Availability Fabric Manager main window, except for the menu bar, which is covered in Chapter 3. Window Overview This section provides an overview of the HAFM main window. Illustrations Used in this Manual Figures containing HAFM and Product Manager screens are included for illustration purposes only. These illustrations may not match exactly what you see on your server or workstation.
Using the HAFM Window Figure 11: High Availability Fabric Manager main window Window Elements The HAFM main window elements are shown in Figure 11. Title Bar The title bar identifies the product. Menu Bar The menu bar provides actions for working with products, fabrics, views, configurations, logs, maintenance. A help menu is also provided. For a detailed description of the menu bar, refer to Chapter 3.
Using the HAFM Window Main Panel The main panel has two tabs available at the top left for choosing a view: Products or Fabrics. In the Fabrics View, the main panel is divided into two panels (left and right). The left panel shows the Fabric Tree. The right panel contains the view area. The right panel has tabs at the lower left of the view area for choosing between a Topology tab view or a Zone Set tab view.
Using the HAFM Window Open Product Icon The Open Product icon (Figure 13) is available in both the Products View and the Fabrics View: ■ In the Products View, the Open Product icon is available when a product icon is selected. ■ In the Fabrics View, the Open Product icon is available when the Topology tab is selected and a product icon is selected. This button has the same functionality as choosing the Product > Open option. It allows you to open the Product Manager for a selected product.
Using the HAFM Window Display Drop-Down List The Display drop-down list (Figure 15) provides options to change the label that displays for the product icons in the Products and Fabrics views. This section describes these options. Figure 15: Display drop-down list ■ Product Name — The name of the product configured through the Configure Identification dialog box in the Product Manager. ■ Network Address — The internet protocol (IP) address or DNS host name of the product.
Using the HAFM Window Persist Fabric Topology Icon In the Fabrics View, the Persist Fabric Topology icon (Figure 16) is available when the Topology tab is selected. Choose the Persist Fabric Topology icon to display the Persist Fabric dialog box for the selected fabric. Enter a name for the fabric and click OK. A persisted fabric is a “snapshot” of the current fabric.
Using the HAFM Window Use this dialog box to perform the major tasks for configuring zoning on the fabric: ■ Configure zone sets by combining zone members (attached nodes) ■ Configure zone sets by combining zones ■ Clear zones ■ Delete zones and zone sets ■ Import and export zone sets ■ Display zone properties ■ Copy zones and zone sets ■ Find zone members in zones ■ Find zones in zone sets ■ Display zone sets, zones, and zone members in the library Refer to “Using the Zoning Library” o
Using the HAFM Window Show View Port Icon In the Fabrics View, the Show View Port icon (Figure 20) is available when the Topology tab is selected. Click the Show View Port icon to see a magnified view of the entire fabric that is in the Topology tab view area. Click inside the view port, and move the mouse in any direction to adjust what you see in the Topology tab view area. The view port makes navigation easier when a large fabric is displayed in the Topology tab view area.
Using the HAFM Window Fit Topology in View Icon In the Fabrics View, the Fit Topology in View icon (Figure 23) is available when the Topology tab is selected. Choose the Fit Topology in View icon to display the entire fabric in the Topology tab view area. Note that for larger fabrics, text and icons may be difficult to see. Return to the original size by choosing View > Zoom Default.
Using the HAFM Window Figure 24: Products View The Products View provides a graphical overview of all the products that you can manage and monitor through the HAFM. In a full-screen environment on an 800 x 600 resolution monitor, this panel displays up to 48 product icons. Right-click a product icon or a blank part of the view to display a pop-up menu. The options on the product icon menu enable you to administer the product for the HAFM.
Using the HAFM Window Fabrics View To access the Fabrics View, click the Fabrics tab. The Fabrics View displays, as shown in Figure 25. Figure 25: Fabrics View The Fabrics View is divided into two panels. The left panel, the Fabric Tree, contains an expandable list of fabrics, products in fabrics, and nodes connected to products. The tree displays all fabrics currently known to the HAFM server. The right panel is the view area.
Using the HAFM Window Status Bar The products, fabrics, and HAFM status elements use the symbols in table Table 2 to indicate their operational state: Table 2: Operational States and Symbols Operational State Symbol Operational Network communication is established. All products, fabrics, and the server are operational and no failures are indicated. Degraded At least one product, fabric, or the server under management is operating in a degraded mode and requires service.
Using the HAFM Window ■ A green circle means that the product is fully operational. ■ A gray square means that the HAFM cannot determine product status. ■ Double-click the icon to display the product status. This log records information when managed products change status. Each entry displays the date and time that the change occurred, the product network address, and the new status, such as Unknown, Operational, Degraded, or Failed.
Using the HAFM Window HAFM Status The HAFM status box indicates the operational state of the HAFM server into which the HAFM is logged. Position the mouse cursor over the status box to display one of the following messages in the text panel: ■ Server status is Operational. The server is fully operational. The status symbol is a green circle. ■ Server status is Degraded. The server is degraded and needs attention. The status symbol is a yellow triangle. ■ Server status is Failed.
Using the Menu Bar 3 This chapter provides a description of the following High Availability Fabric Manager menus on the menu bar: ■ Product ■ Fabrics ■ View ■ Configure ■ Logs ■ Maintenance ■ Help Product The Product menu displays options that are relevant to products. New When the Products tab in the main panel is selected, the New option is available to display the New Product dialog box.
Using the Menu Bar Open The Open option is only available when a product icon is highlighted in either the Products View or the Fabrics View. To open the Product Manager for a product: 1. Click the product icon in either the Products View or Fabrics View to highlight the icon. 2. Click the Product menu. 3. Click the Open option. Refer to “Accessing a Product Manager” on page 94 for more information about opening a Product Manager.
Using the Menu Bar Modify The Modify option is only available when the Products tab is selected. To open the Modify Network Address dialog box for a product: 1. Click a product icon in the Products View to highlight the icon. 2. Click the Product menu. 3. Click the Modify option. The Modify Network Address dialog box displays. 4. Use this dialog box to modify the network address of the product. Refer to “Modify” on page 92 for information about entering the network address.
Using the Menu Bar Fabrics When the Fabrics tab is selected, the Fabrics menu is available; the Fabrics menu is not available when the Products tab is selected. The Fabrics menu displays options that are relevant to fabrics. Rename Choose this option to rename a Persistent Fabric. Until the fabric has been persisted, this option is not available. Choose this option to display the Rename Fabric dialog box.
Using the Menu Bar Show Route Choose this option to display the Show Route dialog box. Use this dialog box to view the path that Fibre Channel frames must take between two end devices in a multiswitch fabric. Refer to “Show Route” on page 108 for the requirements to show a route and how to interpret the display. Hide Route If a route has been displayed, the Hide Route option is available. Choose this option to remove the route currently displayed in the Topology tab view area.
Using the Menu Bar Enterprise Fabric Mode This option is active only if the SANtegrity feature key is installed on each switch in the fabric. For general instructions on enabling feature keys, refer to Chapter 3 in the appropriate Product Manager user manual for your switch or director product. Choose this option to display the Enterprise Fabric Mode dialog box. Use this dialog box to enable and disable Enterprise Fabric mode.
Using the Menu Bar View The View menu displays options that alter the view of application components. User Sessions Choose the User Sessions option to display the User Sessions dialog box (Figure 26). This dialog box lists all the current management sessions, including the name of each user connection, the network address of the user, and the time when the connection was established. Click Close when you have finished reviewing the sessions.
Using the Menu Bar Arrange Icons The Arrange Icons option is available only when the Products tab is selected. Choose the by Name option from the Arrange Icons option to sort the product icons alphabetically by product name in the Products tab view area. Choose the by Severity option from the Arrange Icons option to sort the product icons by status in the Products tab view area.
Using the Menu Bar Enable Fly-Over Display When the Enable Fly-Over Display option is enabled, move the cursor over fabric products in the tab’s view area to display the product identification under the product icon. Moving the cursor over the ISL lines between products displays the actual number of ISLs between the products. Disable the fly-over display by selecting and removing the check mark by the Enable Fly-Over Display option. Configure The Configure menu displays options for managing the fabric.
Using the Menu Bar By default, all users have View rights, which allow the viewing of configurations, but not the changing of configurations. View rights cannot be removed. The users with System Administrator rights can make all control and configuration changes implemented through the HAFM application.
Using the Menu Bar Table 3: User Rights for HAFM Functions (Continued) Rights System Administrator Display Options X Enterprise Fabric Mode X Export Fabric Topology X Export Logs X Fabric Zoom X Persist Fabric X Remote Notification X Show Route X Show Zone X View Logs X Product Administrator Maintenance Operator X X X X Open the Configure User Dialog Box 1. Choose Configure > Users. The Configure Users dialog box displays (Figure 27). 2.
Using the Menu Bar Add New User Use the New User dialog box (Figure 28) to create new users for the HAFM. Assign a user name, a password, and certain permissions to each user configured. 1. Choose Configure > Users. The Configure Users dialog box displays (Figure 27 on page 69). 2. Click New. The New User dialog box displays (Figure 28). Figure 28: New User dialog box 3. In the User name field, enter a user name of 16 characters or less. The user name is case-sensitive. 4.
Using the Menu Bar 6. (Optional) In the Description field, provide a description of the user (such as employee number, department, and function). Assign rights to the new user using the Add and Remove buttons. Select a right in the Rights Available list, and click Add to display the right in the Rights Granted list. For a discussion of user rights, refer to “Managing Remote Access to the HAFM Server” on page 36. By default, view rights are granted to all users. 7.
Using the Menu Bar Modify User Parameters The Modify User dialog box (Figure 29) is used to change the password, description, and rights for those users already configured in the HAFM. 1. In the Password field, delete the current password and enter another password of 16 characters or less. (The password is case-sensitive.) 2. In the Confirm Password field, reenter the new password exactly as it was entered in the Password field. 3.
Using the Menu Bar Nicknames Nicknames replace the standard 8-byte World Wide Names of switches, directors, and attached nodes. By setting a nickname, you can assign a more meaningful name than a WWN. When you assign a nickname, the nickname replaces the World Wide Name in the HAFM views. Note: Nicknames may have a maximum of 32 characters. Adding Nicknames To add a nickname: 1. Choose Configure > Nicknames.
Using the Menu Bar 2. Click New to add a new nickname. The Add Nickname dialog box displays (Figure 32). Figure 32: Add Nickname dialog box (Detached Node) 3. To add a node or switch that is currently managed by HAFM: a. Click Select World Wide Name from List, then click a switch or node WWN from the list. If nodes are attached to a switch, the switch WWN will be next to a folder. To expand a list of node WWNs attached to a switch, click the plus sign by the folder. b. Click OK.
Using the Menu Bar Deleting Nicknames To delete a nickname: 1. In the Configure Nicknames dialog box, select the nickname that you want to delete (Figure 31 on page 73). 2. Click Delete. 3. Click Yes to confirm that you want to delete the nickname. 4. Click OK to close the Configure Nicknames dialog box. Exporting Nicknames Export a list of WWNs and their nicknames to a file (*.properties extension) by clicking the Export button at the bottom of the Configure Nicknames dialog box.
Using the Menu Bar Importing Nicknames Import a list of WWNs and their nicknames from a file with the following extensions into the HAFM by clicking the Import button at the bottom of the Configure Nicknames dialog box: ■ *.properties file — This file is exported from the HAFM using the Export button at the bottom of the Configure Nicknames dialog box. The file contains a list of the 16-digit World Wide Names and their nicknames that were configured through the Configure Nicknames dialog box. ■ *.
Using the Menu Bar 3. Click the file or enter the file name in the File Name field. 4. Click Import. The WWNs and nicknames in the file should display in the Configure Nicknames dialog box. Sessions Sessions allow access to the HAFM server from all workstations or only from specific remote workstations through the Configure Sessions dialog box. A maximum of nine concurrent users (eight remote and one local HAFM server user) can log in to the HAFM application. 1. Choose Configure > Sessions.
Using the Menu Bar 3. Select the number of remote management sessions to be allowed from the Maximum number of remote management sessions list. 4. If you do not want to restrict access to the HAFM, click Allow any network address to connect and click OK. 5. If you want to restrict access to an address: a. Click Restrict access to the following network addresses. b. Click Add. The New Network Address dialog box displays. c.
Using the Menu Bar You can configure network addresses and community names for up to 12 SNMP trap recipients, which receive messages through SNMP for specific events that occur on the HAFM server. When configuring SNMP, you can configure just the community names of valid SNMP management stations. In this case, you do not need to fill in the Trap Recipient column or the UDP Port Number column. To configure and enable SNMP traps, use the following steps: 1. Choose Configure > SNMP Agent.
Using the Menu Bar 5. If you want the trap recipient to be an active recipient, click the check box in the Active column to add a check mark. If you want to configure the recipient and then activate the recipient at a later time, leave the check box empty. 6. To override the default User Datagram Protocol (UDP) port number for a trap recipient with any legal, decimal UDP number, enter the UDP port number in the UDP Port Number column. 7.
Using the Menu Bar ■ Find zones in zone sets ■ Display zone sets, zones, and zone members in library Refer to “Using the Zoning Library” on page 145 for details on zoning and use of this dialog box. Advanced Zoning Choose this option to open a secondary menu with the following options: ■ Deactivate Zone Set — Click this option to display the Deactivate Zone Set dialog box. Use this dialog box to deactivate the current active zone set. Click Start to begin the process.
Using the Menu Bar Event Log Choose this option to display the Event Log, which lists errors related to HAFM operation. Refer to “High Availability Fabric Manager Event Log” on page 170 for a detailed description of the Event Log. Session Log Choose this option to display the Session Log, which lists the users who have logged in and logged out of the HAFM server. Refer to “High Availability Fabric Manager Session Log” on page 172 for a detailed description of the Session Log.
Using the Menu Bar ■ Problem correction. ■ State change that requires user attention or a report to product administrator or service representative. To display and modify e-mail notification: 1. Choose Maintenance > Configure E-Mail. The Configure E-Mail dialog box displays (Figure 37). Figure 37: Configure E-Mail dialog box 2. Enter an IP address or DNS host name for your SMTP server. 3. Enter up to five e-mail addresses for personnel who should be notified automatically of system events. 4.
Using the Menu Bar Test Remote Notification Use the test remote notification feature to test the call-home feature and the current configuration parameters for the e-mail notification feature. ■ To use this feature you must first configure telephone numbers and other information for the Call-Home feature. In LAN-based environments, call home event notification requires installation of Proactive Service software.
Using the Menu Bar 4. Click Send Test. A message box displays indicating that the test was initiated (Figure 39). Figure 39: Results of Remote Notification Test 5. Click OK to close the message box. Configure Ethernet Events An Ethernet event occurs when the Ethernet link between the HAFM server and the managed product is dropped. You can configure Ethernet events for all managed products and set a specific time interval for an event to be generated after the communication drops. 1.
Using the Menu Bar Configure Call-Home Event Notification Call-home notification, which you configure for each product through the Product Manager, enables the HAFM server to automatically contact a support center to report system problems. The support center server accepts calls from the HAFM server, logs reported events, and notifies support center representatives.
Using the Products View 4 This chapter provides information to help you use features in the Products tab. Overview Display the Products View by clicking the Products tab on the High Availability Fabric Manager window. This is the default tab for the HAFM. It displays icons of all products, such as switches and directors, that you can manage through the HAFM and Product Manager applications. Figure 41 illustrates the Products tab displayed in the HAFM window.
Using the Products View Product Icon Display The Products View can display up to 48 product icons. Use the scroll bar to display any icons that are out of view. The view in Figure 41 on page 87 displays director and edge switch product icons. You can also determine the product represented by the icon by right-clicking the icon and choosing Properties or double clicking the icon to display the product’s HAFM Properties dialog box.
Using the Products View ■ Status indicator. This is the colored symbol behind the product’s illustration in the icon. — A blinking red and yellow diamond means that the product has failed and requires immediate service. — A yellow triangle means that the product is degraded, but is still performing as designed. — A green circle means that the product is fully operational. — A gray square means that the HAFM cannot determine product status.
Using the Products View View Context Menus Two pop-up menus are available by right-clicking in the view. One is available when you right-click the view, away from a product icon, and the other when you right-click a product icon. Refer to “Product Icon Pop-Up Menu” on page 92. View Pop-Up Menu The pop-up menu that displays when you right-click the view area (away from a product icon) enables you to add products, change product icon labels, and sort product icons in the view.
Using the Products View Display Options This option displays additional options for displaying the label beneath the icon. ■ Product Name — Choose this option to display the product’s name in the icon label. Change a product’s name through the Product Manager application. Refer to the Product Manager user guide for your switch or director model for instructions. ■ Network Address — Choose this option to display the product’s IP address or DNS (domain name server) host name in the icon label.
Using the Products View Product Icon Pop-Up Menu Access a menu for the product icon by right-clicking the icon. Open Choose this option to open the Product Manager for the selected product. Refer to “Accessing a Product Manager” on page 94 for more information. Modify Choose this option to display the Modify Network Address dialog box. Use this dialog box to modify the network address. To modify existing product properties, use the following steps: 1.
Using the Products View Properties Click this option to display the product’s Properties dialog box, which lists the product name, location, contact person, description, product type, network address, and operational status for the product. The product name, location, contact person, and description are configured through the Product Manager. Refer to the Product Manager user guide for your switch or director for instructions. The network address is configured in the New Product dialog box in the HAFM.
Using the Products View ■ Product type, for example “Edge-32,” as configured through the HAFM New Product dialog box. ■ Network address as configured through the HAFM New Product dialog box. ■ Current product operational status: — Operational — Product is fully operational. — Degraded — Product needs attention. Typically, this displays when a redundant FRU fails, but the product is still performing as designed. — Failed — Product needs immediate attention.
Using the Products View Figure 46: Director 2/64 Product Manager window The Product Manager provides several views for managing and monitoring individual Fibre Channel devices, including the Hardware, Node List, Port List, Performance, and FRU List Views. Through the Product Manager Hardware View, for example, you can determine status and control operation of individual hardware components.
Using the Products View ■ Download firmware. ■ Perform other configuration and monitoring tasks specific to the product. Note: A maximum of eight remote users (in addition to the local HAFM server user) can concurrently access Product Managers for a specific product. The HAFM window is still available as a separate window when a Product Manager is open. You can drag the Product Manager window away from the HAFM window and view both on your desktop. You can also minimize each window.
Using the Products View Available Menu Bar Options The following options are active only in the Products View. For information on other menu options, refer to Chapter 3. Product Menu New — Choose this option to display the New Product dialog box. Use this dialog box to identify a product to the HAFM and add its icon to the Products View. You can also choose this option from the view pop-up menu by right-clicking in the view area away from product icons and selecting New product.
Using the Products View You can also arrange icons by name and severity by selecting the Sort option from the view pop-up menu by right-clicking in the view, away from product icons. Enable Fly-Over Display — When Fly-Over Display is enabled (View menu on menu bar), move the cursor over fabric products in the tab’s view area to display the product’s WWN over the product icon. Moving the cursor over the ISL lines between products displays the actual number of ISLs between the products.
Using the Fabrics View 5 This chapter provides information to help you use the Fabrics View in the High Availability Fabric Manager window. Overview Access the Fabrics View by clicking the Fabrics tab on the HAFM window. The left panel of this view is the Fabric Tree, which is the expandable list of fabrics, products in fabrics, and nodes connected to products. The view area for the tab is to the right of the Fabric Tree.
Using the Fabrics View Topology Tab The view area of the Topology tab provides details on all fabrics known to the HAFM server and HAFM application. This area displays product icons like those in the Products View, each representing switches and directors in fabrics that you select from a Fabric Tree on left panel of the view. Interswitch links (ISLs) display between the product icons as black lines. For details on the product icons, refer to “Icon Description” on page 88.
Using the Fabrics View Figure 48: Fabrics View — Zone Sets tab Fabric Tree The scrollable panel on the left side of the Topology and Zone Set tabs contains a list of fabrics that you can select for display of information or to perform actions on in the left panel of the Topology and Zoning tabs. The tree displays all fabrics currently known to the HAFM server.
Using the Fabrics View Click the button to the left of fabric name or WWN to expand the tree and display the WWN or nicknames (if configured) of all products, such as switches and directors, included in the fabric. A product status icon will display by each product in the tree (Refer to “Status Icons” on page 103). If the product is not managed by the HAFM server that you are using, no status icon displays.
Using the Fabrics View Status Icons Colored icons reflecting the fabric and product (switch or director) operational status display by names and WWNs in the Fabric Tree. Fabric Colored icons reflecting the fabric status display before a fabric name only if the fabric is “persisted.” ■ A blinking red and yellow diamond means that the fabric has split into two or more fabrics.
Using the Fabrics View Fabric Pop-Up Menu Right-click a fabric name or WWN in the Fabric Tree to display a pop-up menu of options. Rename This option is available only if the fabric is persisted. Choose this option to display the Rename Fabric dialog box. Enter a name in the dialog box to display in the Fabric Tree and at the top of the Topology and Zone Set tabs. Persist Fabric Topology Choose this option to display the Persist Fabric dialog box.
Using the Fabrics View Properties Displays the Fabric Properties dialog box. Figure 49: Fabric Properties dialog box This dialog box displays current information on the selected fabric including: ■ Fabric Status — For persisted fabrics only, this is the status also reflected by the status symbol by fabric name in the Fabric Tree. Refer to the “Fabric” heading under “Status Icons” on page 103 for details.
Using the Fabrics View Product Pop-Up Menu Right-click a product WWN or name (if configured through the Configure Nicknames dialog box) to display a pop-up menu of options. Open Click this to open the Product Manager for the selected product (Figure 50). Figure 50: Director 2/64 Product Manager window The Product Manager provides several views for managing and monitoring individual Fibre Channel devices, including the Hardware, Node List, Port List, Performance, and FRU List Views.
Using the Fabrics View ■ Determine port performance. ■ Control the system error indicator light emitting diode (LED) and beaconing operation for other product LEDs. ■ Enable an initial program load (IPL). ■ Download firmware. ■ Perform other configuration and monitoring tasks specific to the product. Note: A maximum of eight remote users (in addition to the local HAFM server user) can concurrently access Product Managers for a specific product.
Using the Fabrics View Node Pop-Up Menu Right-click a node’s WWN or name (if configured through the Configure Nicknames dialog box) to display a pop-up menu of options. Properties Click to display the Node Properties dialog box. Figure 51: Node Properties dialog box This dialog box contains the following information: ■ Port WWN World Wide Name of port on the attached device. ■ Port Number The physical port number on the product to which the node is connected.
Using the Fabrics View Show Zone Members Click to display the Show Zone Members dialog box. This dialog box displays a tree of all products in the fabric in the left panel. Click an icon by a product to expand the list of attached nodes. Select a node and the WWNs or nicknames (if configured) of nodes that are members of the same zone as the selected node display in the right panel. Refer to Chapter 6, for details on zoning and zoning configuration.
Using the Fabrics View Pop-Up Menus Right Click a product icon, ISL, or blank area in the view area to display a menu of options. Product Icon Right-click a product icon in the Topology View area to display the following menu options: ■ Open — Click to open the Product Manager application for the product. You can also choose this option from the product pop-up menu by right-clicking a product name in the Fabric Tree. Refer to “Open” on page 106 for more details on this option.
Using the Fabrics View ■ Properties — Displays the ISL Properties dialog box (Figure 52). You can also double-click the ISL to display this box. This dialog box displays the domain ID and port number for both products where the ISL is attached. The Alert column contains a minus-sign symbol if the ISL was removed and plus-sign if the ISL was added to the fabric since the last time the fabric was persisted. Note that ISL alerts only occur if the fabric is persisted.
Using the Fabrics View ■ Persist Fabric Topology — This persists the currently selected fabric. If the fabric was not persisted previously, this option displays the Persist Fabric dialog box, where you can provide a name for the persisted fabric. A persisted fabric is a “snapshot” of the current fabric. When the fabric configuration of ISLs and products change from this snapshot, status indicators display in the tab view, and entries on fabric changes appear in the Fabric Log.
Using the Fabrics View ■ Click the Layout Icons, Show View Port, Zoom In, Zoom Out, and Fit Topology Into View buttons on the right side of the tool bar at the top of the HAFM window. These options manipulate the fabric in the view area and are also available under the View menu on the menu bar. ■ Use the horizontal and vertical scroll bars on the edges of the view area.
Using the Fabrics View This snapshot will persist in the Topology view and real-time changes to the fabric will be reflected by graphic indicators such as alert indicators (yellow triangles), dimmed product icons, and dashed yellow lines as shown in Figure 53. You can persist a fabric whenever you want to refresh the view to the current fabric state and track changes from the new persisted view.
Using the Fabrics View Switch or director removed from fabric. Figure 54: Icon display when switch or director removed from fabric — A plus sign (+) displays in the lower right corner of the product’s icon if the switch or director was added. Figure 55 illustrates the icon when a fabric element is added. Switch or director add to fabric.
Using the Fabrics View Fabric Log Changes to the fabric are reflected in the Fabric Log (Logs menu on menu bar). This log tracks the following changes: ■ Zone sets becoming active. ■ Switch added/removed. ■ ISL added/removed. ■ Fabric renamed. ■ Fabric persisted. ■ Fabric status changes. The following is recorded in the log: ■ Date and time of the change. ■ Change in the fabric status: — Operational — No attention indicators in view.
Using the Fabrics View Unpersisting Fabrics You can a unpersist a fabric by choosing Fabric > Unpersist Fabric Topology, the right-click fabric pop-up menu in the Fabric Tree, or the right-click view pop-up menu in the Topology view area. Choosing this option displays a warning that the fabric log will be lost if the fabric is unpersisted. Click Yes to unpersist the fabric and the current view of the fabric displays in the tab’s view area without the fabric status indicators.
Using the Fabrics View Fabrics Choose the Fabrics menu on the menu bar to display the following options. Rename This option is only active if a fabric is persisted. Click this to display the Rename Fabric dialog box. Enter a new name to change the name displayed in the Fabrics View. Persist Fabric Topology This persists the currently selected fabric. If the fabric was not persisted previously, this option displays the Persist Fabric dialog box, where you can provide a name for the persisted fabric.
Using the Fabrics View ■ Link identification number for the ISL. ■ Port number on the remote switch or director where the ISL is attached. An example of an exported file follows. Exported File Example Following is a partial exported file showing two members in a fabric.
Using the Fabrics View
Using the Fabrics View The Show Route dialog box (Figure 56) displays products (switches and directors) that support route reporting and are managed by this HAFM server in the Select Source Node panel. Figure 56: Show Route dialog box To show the route for two specific nodes, perform the following steps: 1. Click the icon by a product in the Select Source Node panel to expand the list of nodes attached to the product. 2. Click a source node to select it. 3.
Using the Fabrics View Figure 57: Route displayed in Topology tab The route between the nodes and through the products display as a thick blue line between two node icons. Right click the line to display the following menu options: ■ Hide Route. Click to remove the route from the display. ■ Properties. Click to display a dialog box that details route information. This dialog box contains the following information: — WWN or nickname of source node.
Using the Fabrics View Hide Route This option is only active if the tab’s view area is displaying a route between nodes in the fabric. Click this option to remove the route from the display that was enabled with the Show Route menu option. Show Zone Members Click to display the Show Zone Members dialog box. This dialog box displays a tree of all products in the fabric in the left panel. Click an icon by a product to expand the list of attached nodes.
Using the Fabrics View View Choose the View menu on the menu bar to display the following options: User Sessions Click this to display the User Sessions dialog box. This lists sessions with the HAFM server from remote workstations. The dialog box lists user names, remote workstation address, and the date/times that users established a connection. For details, refer Chapter 3. Zoom ■ In. Each time that you click this option, fabric elements in the view area increase in size.
Using the Fabrics View Clear All ISL Alerts This option is only enabled if you have persisted a fabric. Selecting this will clear all ISL alerts in the view. Enable Fly Over Display Enable the fly-over display of product identification and the number of ISLs between products when you move the cursor over elements in the view area by selecting the check box. Disable the fly-over display by clearing the check mark.
Using the Fabrics View SNMP Agent Opens the Configure SNMP dialog box that allows you to configure the SNMP agent that runs on the HAFM server and implements the Fibre Alliance MIB. The HAFM server software contains a simple network management protocol (SNMP) agent component. The HAFM SNMP agent instruments the objects defined in the Fibre Channel Management (FCMGMT) Management Information Base (MIB) Version 2.2 and a small number of objects defined in MIB II.
Using the Fabrics View ■ Import and export zone sets ■ Display zone and zone set properties ■ Copy zones and zone sets ■ Find zone members in zones ■ Find zones in zone sets ■ Display zone sets, zones, and zone members in library Refer to “Using the Zoning Library” on page 145 for details on zoning and use of this dialog box. Advanced Zoning Choose this option to open a secondary menu with the following options: ■ Deactivate Zone Set.
Using the Fabrics View Properties Click this to display a Properties dialog box for elements selected in the Topology tab view area. If a product is selected, the Properties dialog box for the switch or director displays (refer to “Properties” on page 93. If nothing is selected, the Properties dialog box for the fabric displays (refer to “Properties” on page 105). Display Drop-Down Box Click this drop-down list to change the product label under the product icon in the Topology tab’s view area.
Using the Fabrics View Show View Port Opens up the view port window so that you can adjust the display of the fabric in the tab’s view area. This option is also available under the Fabrics menu on the menu bar. Click inside the View Port window and move the mouse to adjust the view of the fabric in the tab’s view area. Zoom In Click this to zoom in and enlarge the view of fabric elements in the view area. This option is also available in the Zoom secondary menu under the View menu on the menu bar.
Using the Fabrics View Using the Zone Set Tab Click the Zone Set tab in the Fabrics View to open the Zone Set tab view. Select a fabric in the Fabric Tree on the left side of the tab to display information on the currently active zone set for the fabric in the right view area. Initially, a tree structure of zones and zone members in the active zone set is completely expanded in the display area. An expanded tree of zone members will also display for the default zone if it is currently enabled.
Using the Fabrics View Available Menu Bar Options All menu bar options that are enabled in the menu bar are covered in Chapter 3 of this guide. You can also show or hide the Fabric Tree on the left side of the tab by clicking the Show Fabric Tree check box under the Fabrics menu. This expands the view area for displaying the active zone, zones, and members.
Using the Fabrics View 132 High Availability Fabric Manager User Guide
Fabric Zoning 6 This chapter explains how to: ■ Zone fabrics ■ Use zoning features and dialog boxes Zoning Basics Note: Designing zoning can be a complex task, especially for multiswitch fabrics. Refer to HP’s professional services organization before configuring zoning. This section is designed to help you understand the following concepts so that you can more efficiently use HAFM features to configure and manage zones across a multiswitch fabric: ■ Benefits of zoning.
Fabric Zoning Controlling Access Across a Fabric The fabric zoning feature enables you to partition devices attached to managed Fibre Channel products into groups called zones. A zone contains devices that can access one another through port-to-port connections. Devices in the same zone can recognize and communicate with one another; devices in different zones cannot.
Fabric Zoning Figure 58 illustrates three zones established on a single managed product with four devices in each zone. Devices in each zone can communicate with and access devices only in their respective zones.
Fabric Zoning Figure 59 illustrates how zones can consist of ports and/or devices installed on ports in three managed products in a multiswitch fabric.
Fabric Zoning Controlling Access at the Switch A port binding feature is available on switches and directors that allows you to “bind” a specific switch or director port to the WWN of an attached device for exclusive communication. This WWN binding feature is available through the Configure Ports option in the Product Manager application’s Configure menu.
Fabric Zoning ■ The connection is bound to a storage port WWN. If the fiber optic cable is disconnected from the storage port, the server-to-storage connection is automatically reestablished when the port cable is reconnected. The connection is also automatically reestablished if the storage port is cabled through a different managed product port. Access can also be controlled at the storage device as an addition or enhancement to redundant array of independent disks (RAID) controller software.
Fabric Zoning Naming Conventions for Zones and Zone Sets The following naming conventions apply to zones and zone sets: ■ All names must be unique and may not differ by case only. For example, myzone and MyZone are both valid individually, but the are not considered to be unique. ■ The first character of a zone set name must be a letter (A-Z, a-z). ■ A zone set name cannot contain spaces. ■ Valid characters are a-a, A-A, 0-9, ^, -, _, and $. ■ A zone set name can have a maximum of 64 characters.
Fabric Zoning Using WWNs To identify a zone member by WWN, use the 16-digit WWN of the device. For example: 10:00:08:00:88:40:C0:D4 In the HAFM and Product Manager, the WWN is preceded with the switch or director manufacturer’s name. The WWN is assigned to the Fibre Channel interface or HBA installed in devices such as servers or storage devices. Although the device may also have a node WWN, this WWN is not used for zoning identification.
Fabric Zoning The advantage of identifying a zone member by port number is that if the HBA on an attached device fails, you do not have to identify the member with the WWN of the replacement HBA. A disadvantage of port zoning is that someone may rearrange cable connections to ports (because of port failures or other reasons) and inadvertently allow devices to communicate that should not have access to each other.
Fabric Zoning The following are some important points to remember about zone sets: ■ If no zone set is active, and the default zone is disabled, then no devices can communicate. ■ If you activate a zone set when there is already an active zone set, that set will replace the currently active zone set. ■ If you deactivate the current active zone set, then all devices connected in the fabric become members of the default zone.
Fabric Zoning Merging Zoned Fabrics Managed products are linked through ISLs to form multiswitch fabrics. In a multiswitch fabric, the active zoning configuration applies to the entire fabric. Any change to the configuration applies to all switches in the fabric. Configurations of Merged Zoned Fabrics When fabrics join through an ISL, adjacent managed products exchange active zone configurations and determine if the configurations are compatible and can merge.
Fabric Zoning Table 4: Merging Fabrics — Results for Zone Configurations Fabric A Fabric B Result Not zoned Not zoned Fabrics join successfully. The new fabric remains not zoned. Not zoned Zoned Fabrics join successfully and the active zone set will propagate across the fabric. Fabric A inherits zoning configuration from Fabric B. Zoned Not zoned Fabrics join successfully and the active zone set will propagate across the fabric. Fabric B inherits zoning configuration from Fabric A.
Fabric Zoning Configuring Zoning through the HAFM This section provides procedures for using the menu options available through the HAFM Fabrics tab to configure and manage zoning. For information on other menu options, refer to Chapter 3. To configure new zones and a zone set, then activate a new zone set for the fabric, follow these three steps: 1. Create zones. Follow steps under Configure Zones and Zone Sets on page 148 under “Configuring Zoning through the HAFM.” 2. Create a zone set.
Fabric Zoning Use this dialog box to perform major tasks for configuring zoning on the fabric: ■ Display zone sets, zones, and zone members in library ■ Configure zones by adding zone members (attached nodes) ■ Configure zone sets by adding zones ■ Clear zones ■ Delete zones and zone sets ■ Import and export zone sets ■ Display zone and zone set properties ■ Copy zones and zone sets ■ Find zone members in zones ■ Find zones in zone sets The following table lists the configuration limits
Fabric Zoning Menus The following menus and options are available in the Zoning Library dialog box. Page numbers are provided for procedures in using these options. Options under specific menus may only be enabled or perform different functions depending on whether the Zones or Zone Sets tab is selected.
Fabric Zoning Table 6: Menu Options in Zoning Dialog Boxes (Continued) Menu Menu Option Procedures Right-click menu (zoning library) Rename Rename Zones and Zone Sets, page 156 Right-click menu (zoning library) Delete Delete Zones and Zone Sets, page 155 Right-click menu (zoning library) Properties Display Zone and Zone Set Properties, page 157 Display Configured Zone Sets and Zones Click the Zone Sets tab (default) to display all configured zone sets.
Fabric Zoning Note: Names for zones and zone sets must follow specific rules. Refer to “Naming Conventions for Zones and Zone Sets” on page 139 for details. 5. Select the fabric for which zoning is being configured from the drop-down menu. 6. In the Attached ports/nodes area, click the icon to the left of a numbered domain folder to display a list of ports and attached nodes for the director or switch (Figure 61).
Fabric Zoning 7. Add members to the new zone using the following steps: a. Decide if you want to add members by port number or WWN of attached node. — If you want to add zone members by port number only (not supported in Open Fabric 1.0 interop mode), click the Add by Port radio button at the bottom of the display area. Click the icon next to the domain folder again to display only the products in the Attached ports/nodes area.
Fabric Zoning 8. Click the Add >> button to move the selections to the Members in zone area on the right side of the screen. Figure 62 illustrates members added to the new zone. The members were added with Add by WWN selected. Figure 62: New Zone dialog box — adding zone members 9. To add nodes that are not listed in the Attached ports/nodes area (for example, detached nodes), click Add Detached Nodes at the bottom of the Members in zone area. The Add Detached Nodes dialog box displays (Figure 63).
Fabric Zoning 11. To remove members from the zone, select them and click the << Remove button. To remove all of the members, click Clear Zone at the bottom of the Members in zone area. Click Yes when the Warning dialog box displays. 12. To accept the zone, click OK. The New Zone dialog box closes and the new zone displays in the Zones tab of the Zoning Library dialog box.
Fabric Zoning Configured zones should display in the Zones in Library area. If zones do not display, you must first configure zones before you can configure any zone sets. To view members in the zones displayed, click a zone to select it, then click View Members at the bottom of the Zones in Library field. 4. Enter a name for the new zone set in the Zone Set Name field. Names for zones and zone sets must follow specific rules. Refer to “Naming Conventions for Zones and Zone Sets” on page 139for details. 5.
Fabric Zoning 7. To accept the zone set, click OK. The New Zone Set dialog box closes and the new zone set displays in the Zone Set tab of the Zoning Library dialog box. Modify Zones and Zone Sets Use the following procedures to modify existing zones and zone sets using the Open option in the File menu. Zones 1. Choose the Zones tab in the Zoning Library dialog box. 2. Click a zone in the library to select it. 3. Click File > Modify or right-click the zone and choose Modify from the pop-up menu.
Fabric Zoning Copy Zones and Zone Sets Copy zones and zone sets to a zone or zone set with a different name using the following steps. Zones 1. Choose the Zones tab in the Zoning Library dialog box. 2. Click a zone to select it in the library. 3. Choose Edit > Copy Zone. 4. When the Copy Zone dialog box displays, enter a name of up to 64 characters (no spaces) for the zone. 5. Click OK. The new zone displays in the Zoning Library dialog box. Zone Sets 1.
Fabric Zoning Rename Zones and Zone Sets Delete zones and zone sets from the library using the following steps: Zones 1. Choose the Zones tab in the Zoning Library dialog box. 2. Click a zone to select it and choose File > Rename, or right-click the zone and choose Rename from the pop-up menu. 3. When the Rename dialog box displays, enter a new name. Names for zones and zone sets must follow specific rules. Refer to “Naming Conventions for Zones and Zone Sets” on page 139 for details. 4.
Fabric Zoning If the imported zone set contains zones that are already in the library, an error message displays. Export Zone Set 1. Choose the Zone Sets tab in the Zoning Library dialog box. 2. Choose a zone set for export. 3. Choose File > Export Zone Set. The Export Zone Set dialog box displays. 4. Enter a name in the dialog box for the .xml file in the File Name field, select a folder on your C: drive or network drive where you want to save the file, then click Save.
Fabric Zoning Figure 66: Zone Properties dialog box The dialog box summarizes the number of zone sets containing the same zone and lists the zone members in the zone. 3. Click Close to close the dialog box. Zone Sets 1. Choose the Zone Sets tab in the Zoning Library dialog box. 2. Click a zone set to select it and choose File > Properties, or right-click the zone and choose Properties from the pop-up menu. The Zone Set Properties dialog box displays (Figure 67).
Fabric Zoning Figure 67: Zone Set Properties dialog box The dialog box summarizes the number of zones and unique zone members in the zone set. The Zone Set Library, consisting of the zone set, its zones, and zone members, are displayed in a tree structure in the Zones In Set display area. Click the icon to the left of the zone set folder to expand the list of zones in the set. Click the icon to the left of a zone folder to expand the list of members in that zone. 3. Click Close to close the dialog box.
Fabric Zoning Find Zones You can find zones by using the Find Zone option in the Edit menu (Zones tab). Use this option to get a quick view of which zone sets a selected zone is part of. Once you find a zone in a specific zone set, you can remove the zone from the zone set using the Remove button on the Find Zone dialog box. To find zones: 1. Choose the Zones tab in the Zoning Library dialog box. 2. Click a zone to select it. 3. Choose Edit > Find Zone.
Fabric Zoning 3. Enter a valid WWN or nickname (if configured) and click OK. The Find WWN/Nickname dialog box displays (Figure 68). It lists all zones where the member was found in the right part of the dialog box and zone sets where the zones were found in the left part of the dialog box. You can click the zone sets and zones that display in the dialog box to select them. Figure 68: Find WWN/Nickname dialog box 4.
Fabric Zoning Activate Zone Sets Choose the Activate Zone Set option from the Configure menu on the HAFM menu bar to activate a zone set to control access between devices in a fabric. Only one zone set in the fabric can be active at one time. Activating a zone set replaces the current active zone set with the one you activate. Note that changing the configuration for an active zone set does not dynamically apply changes.
Fabric Zoning An Activate Zone Set screen (Figure 70) displays that shows the differences between the zone set that you are activating and the old zone set. In the differences area, click the icon before the zone set name to expand the list of zones in the set. Figure 70: Activate Zone Set (Differences) screen Determine which zones will be added and removed when the previous zone set is replaced with the new zone set by the icons and text color displayed in the expanded list of zone names.
Fabric Zoning 6. Click Next. An Activate Zone Set screen (Figure 71) displays, listing the directors and switches affected by the change in active zone sets. The switch/director domain ID displays in the left panel and the WWN displays in the right panel. The domain ID is a unique domain identification of a switch or director product (for example, 1-31). Messages may display in this screen warning you of possible consequences when activating the new zone set.
Fabric Zoning Deactivate Zone Sets To deactivate zone sets: 1. Select the fabric in the Fabric Tree area for which the zone set is to be deactivated. 2. Choose Configure > Deactivate Zone Set (Advanced Zoning submenu). The Deactivate Zone Set dialog box displays. Use this dialog box to deactivate the current active zone set. 3. Click Start to begin the process and messages display to indicate deactivation status. When the Close button displays, you can close the dialog box.
Fabric Zoning Show Zone Members To show zone members: 1. Select the fabric in the Fabric Tree area for which zone members are to be shown. 2. Click the Fabrics > Show Zone Members to display the Show Zone Members dialog box. This dialog box displays a tree of all products in the fabric in the left panel. 3. Click an icon by a product name to expand the list of attached nodes. 4.
HAFM Logs 7 This chapter contains information on the High Availability Fabric Manager logs. Using Logs The Audit, Session, Product Status, and Fabric Logs store up to 1000 entries each. The most recent entry displays at the top of the log. After 1000 entries are stored, new entries overwrite the oldest entries. The Event Log stores up to 500 entries. The most recent entry displays at the top of the log. After 500 entries are stored, new entries overwrite the oldest entries.
HAFM Logs Button Function Button function is the same for all logs: ■ Export Click Export to display the Save dialog box shown in Figure 77 on page 175. Click Home to display the folders that are stored in your home directory. If you choose, you may create a folder for your home directory and save the file there. ■ Clear Click Clear to clear all entries for all users. A Warning dialog box displays requesting confirmation that you want to clear all entries in the log.
HAFM Logs High Availability Fabric Manager Audit Log The HAFM Audit Log displays a history of user actions performed through the HAFM. The log stores up to 1000 entries, the most recent displaying at the top of the log. After 1000 entries have been stored, new entries take the place of the log’s oldest entries. To display the Audit Log, choose Logs > Audit Log. The Audit Log displays (Figure 72).
HAFM Logs ■ The Event column describes the action that took place. Logged actions could include: — Defining a new product — Modifying product attributes — Deleting product definitions — Defining a new user — Modifying user administration — Deleting user administration — Creating a zone set — Modifying a zone set — Modifying SNMP options ■ The Parameter column describes the parameter affected by the event.
HAFM Logs To display the Event Log, choose Logs > Event Log. The Event Log displays (Figure 73). Figure 73: High Availability Fabric Manager Event Log ■ The Date/Time column logs the date and time the event was reported to the HAFM server. ■ The Event column lists an event number and brief description of the event. Includes both the event number and description when reporting an event to third-level customer support. ■ The Product column lists the product associated with the event.
HAFM Logs High Availability Fabric Manager Session Log The HAFM Session Log provides the date/time, user name, and network address of each login and logout on the HAFM server. To display the Session Log, choose Logs > Session Log. The Session Log displays (Figure 74). Figure 74: High Availability Fabric Manager Session Log 172 ■ The Date/Time column displays the date and time of the event. ■ The Event column displays either login or logout. ■ The User column displays the user name.
HAFM Logs High Availability Fabric Manger Product Status Log The HAFM Product Status Log reflects the time and nature of significant events on all managed products, and indicates which specific Product Manager applications should be opened to further investigate product status changes. To display the Product Status Log, choose Logs > Product Status Log or double click the Products icon on the HAFM status bar. The Product Status Log displays (Figure 75).
HAFM Logs High Availability Fabric Manager Fabric Log The HAFM Fabric Log reflects the time and nature of significant changes in the managed fabric. To display the Fabric Log, choose Fabric Log from the Logs menu or double click the Fabrics icon on the HAFM status bar. The Fabric Log displays (Figure 76). Figure 76: High Availability Fabric Manager Fabric Log ■ The Date/Time column displays the date and time of the change in the fabric.
HAFM Logs Figure 77: Save dialog box 2. In the Save dialog box, browse to the folder where you want to save the file. 3. Type a file name and extension in the File name field. 4. Click Save. The file saves to the specified folder as an ASCII text file.
HAFM Logs 176 High Availability Fabric Manager User Guide
Optional Features 8 This chapter provides detailed information on using, administering, and configuring optional HAFM features through HAFM applications. There are two types of features covered in this chapter: ■ “Keyed” features, requiring feature keys to be purchased and enabled through the Configure Feature Key dialog box in the product’s Product Manager application.
Optional Features Configuring the FICON Management Server Use this procedure to configure whether the host is the controlling manager. The optional FICON Management Server feature must be installed in order to perform this procedure. ■ Enable Management Server Click this check box to add a check mark and enable the management server. Click the check mark to remove it and disable this feature. ■ Switch Clock Alert Mode Click this check box to display a check mark and enable clock alert mode.
Optional Features — If Active=Saved is not enabled (no check mark), the IPL address configuration and the active configuration are not maintained as identical, and may be different configurations. If the feature is not enabled, you can modify the IPL configuration through the Configure Addresses “Active” dialog box. If the feature is enabled, the IPL file is locked to modification through the Configure Addresses - “Active” dialog box.
Optional Features Configuration Procedure To configure the FICON management server, use the following steps: 1. Choose Configure > Management Server from the Product Manager window. The Configure FICON Management Server dialog box displays (Figure 78). Figure 78: Configure FICON Management Server dialog box 2. Enable or disable the management server by clicking Enable Management Server check box. (To disable the management server, click the check box again to remove the check mark.) 3.
Optional Features Open Systems Management Server The Open System Management Server (OSMS) is a keyed feature that allows host control and inband management of the director or switch through a management application that resides on an open-systems interconnection (OSI) device. This device is attached to a director or switch port. The device communicates with the switch or director through Fibre Channel common transport (FC-CT) protocol.
Optional Features 3. Click the check box in the Host Control Prohibited field to display a check mark and to prohibit the host management program from changing configuration and connectivity parameters on the switch. In this case, the host program has read-only access to configuration and connectivity parameters. Clicking the check box when it contains a check mark removes the check mark and allows a host program to change configuration and connectivity parameters on the switch. 4.
Optional Features Fabric Binding This feature is managed through the Fabric Binding option, available through the Fabrics menu in HAFM when the Fabrics tab is selected. Using Fabric Binding, you can allow specific switches to attach to specific fabrics in the SAN. This provides security from accidental fabric merges and potential fabric disruption when fabrics become segmented because they cannot merge.
Optional Features Configuring Switch Binding Overview To configure Switch Binding, you must first activate the feature using the Switch Binding State Change dialog box while selecting the type of port where you want to restrict connection (connection policy). Possible selections are E_Ports, F_Ports, or all types.
Optional Features Enable/Disable Switch Binding Use the following procedure to enable and disable switch binding: 1. Choose the Configure > Switch Binding > Change State from the Product Manager window. The Switch Binding State Change dialog box displays (Figure 80). Figure 80: Switch Binding State Change dialog box 2.
Optional Features ■ Restrict All — Select if you want to restrict connections from specific devices to switch F_Ports and switches to switch E_Ports. Device and switch WWNs can be added to the Switch Membership List to allow connection and removed from the Membership List to prohibit connection. 4. Click Activate to enable the changes and close the dialog box. 5.
Optional Features 2. If nicknames are configured for WWNs through HAFM and you want these to display instead of WWNs in this dialog box, click Display Options. The Display Options dialog box displays. 3. Click Nickname, then click OK. 4. To prohibit connection to a switch port from a WWN currently in the Membership List, click the WWN or nickname in the Membership List, then click Remove. The WWN or nickname will move to the Node List panel.
Optional Features Enable/Disable and Online State Functions In order for Switch Binding to function, specific operating parameters and optional features must be enabled. Also, there are specific requirements for disabling these parameters and features when the director or switch is offline or online. Be aware of the following: ■ Switch Binding can be enabled or disabled whether the switch is offline or online. ■ Enabling Enterprise Fabric Mode automatically enables Switch Binding.
Optional Features Zoning with Switch Binding Enabled Note that SANtegrity has no effect on existing zoning configurations. However, note that if a device WWN is in a specific zone, but the WWN is not in the Switch Membership List, the device cannot log in to the director or switch port and cannot connect to other devices in the zone with Switch Binding enabled.
Optional Features Rerouting Delay Rerouting Delay is a parameter in the Configure Switch Parameters dialog box, available from the Configure menu in the Product Manager application. Rerouting Delay ensures that frames are delivered through the fabric in order to their destination.
Optional Features Insistent Domain Identification (ID) This is a parameter in the Configure Switch Parameters dialog box, available from Configure menu in the Product Manager application. Enabling this option sets the domain ID configured in the Preferred Domain ID field in the Configure Switch Parameters dialog box as the active domain identification when the fabric initializes.
Optional Features In particular, you do not need to manually configure ISLs into “trunk groups” of redundant links where data can be “off-loaded.” Candidate links for rerouting flow are identified and maintained automatically. This means that flow may be rerouted onto a link that goes to a different adjacent switch as long as that link is on the least cost/shortest path to the destination domain ID.
Optional Features 3. Set the Congestion Thresholds for ports as percentages of link bandwidths, in the range of 1% through 99%. These thresholds are used only when a port becomes an ISL. When the link’s traffic load becomes greater than this percentage, the link is seen as “congested” and traffic is rerouted (if possible) to an uncongested link. Note that rerouting may not be possible if there are no alternate links available or if alternate links are congested or have no available BB_Credit.
Optional Features ■ Back Pressure — Click this check box to display a check mark and enable this option. If enabled, a back pressure entry will be made to the Event Log and an SNMP trap will be generated if trap recipients are configured through the Configure SNMP dialog box. A back pressure event occurs when the percentage of time the ISL has no available BB_Credit exceeds the low BB_credit threshold. A separate event also occurs when the backpressure condition ends. 5. Set the Low BB_Credit Threshold.
Optional Features Pop-Up Menu Right click on columns in the Configuration Threshold table to display menu options that globally change values in the column cells. Use Algorithmic Threshold Right click in the column to display these options: ■ Set all to Default — Adds check marks to all check boxes in this column and sets all cells of Threshold % column to default values. ■ Clear All — Clears all check boxes in this column and restores values in cells of Threshold % column with previous values.
Optional Features 196 ■ Old Exit Port — The decimal exit port number on this switch that the flow used to get to the target domain. ■ New Exit Port — The decimal exit port number on this switch that the flow now uses to get to the target domain.
A Information and Error Messages This appendix describes messages that may appear as you use the High Availability Fabric Manager. A description and action are provided for each message, which is listed in alphabetical order. Table 9: High Availability Fabric Manager Messages Message Description Action A zone must have at least one zone member. When creating a new zone, one or more zone members must be added. Add one or more zone members to the new zone. A zone set must have at least one zone.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 198 Description Action Are you sure you want to delete this user? The selected user will be deleted from the list of user definitions. Click Yes to delete the user or No to cancel the operation. Are you sure you want to delete this zone? Requesting confirmation to delete the specified zone. Click Yes to confirm the deletion of the zone or No to cancel the operation.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message Description Action Cannot display route on a one switch fabric. You cannot show routes between end devices in a fabric when configuring Show Routes (Fabrics menu). Error displays when attempting to show routes on a fabric with only one switch. Configure the Show Route option on a multiswitch fabric. Cannot display route. All switches in route must be managed by the same server.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 200 Description Action Cannot modify a zone with an invalid name. Rename zone and try again. Zone does not have a valid name. Rename zone, then use Modify Zone dialog box to modify zone. Cannot modify product. The selected product cannot be modified. Verify the HAFM server-to-product link is up. If the link is up, the HAFM server may be busy. Another Product Manager instance may be open.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message Description Action Click OK to remove all contents from log. This action deletes all contents from the selected log. Click OK to delete the log contents or Cancel to cancel the operation. Connection to HAFM server lost. Click OK to exit application. The HAFM application at a remote workstation lost the network connection to the HAFM server.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 202 Description Action Duplicate Fabric Name. The fabric name that you have specified already exists. Choose another name for the fabric. Duplicate name in zoning configuration. All zone and zone set names must be unique. Every name in the zoning library must be unique. Modify (to make it unique) or delete the duplicate name. Duplicate nickname in nickname configuration.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message Description Action HAFM server is shutting down. Connection will be terminated. The HAFM application is closing and terminating communication with the attached product. Reboot the HAFM server. If the problem persists, contact the next level of support. Enabling this zone set will replace the currently active zone set. Do you want to continue? Only one zone set can be active.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) 204 Message Description Action Fabric Log will be lost once the fabric unpersists. Do you want to continue? When you unpersist a fabric, the corresponding fabric log is deleted. Click Yes to unpersist the fabric or No to cancel the operation. Fabric not persisted. The user attempted to refresh or clear the Log dialog, after a fabric was unpersisted.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message Description Action Invalid port number. Valid ports are (0-< nn >). You have specified an invalid port number. Specify a valid port number, in the range 0 to the maximum number of ports on the product minus 1. For example, for a switch with 32 ports, the valid port range is 0–31 Invalid product selection. At the New Product dialog box, an invalid product was selected.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message 206 Description Action Invalid World Wide Name or nickname. The World Wide Name or nickname that you have specified is invalid. The valid format for the World Wide Name is eight two-digit hexadecimal numbers separated by colons (xx:xx:xx:xx:xx:xx:xx:xx). The valid format for a nickname is non blank characters, up to 32 characters. Try the operation again using a valid World Wide Name or nickname.