FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager User Guide
Using the Fabrics View
119High Availability Fabric Manager User Guide
■ Link identification number for the ISL.
■ Port number on the remote switch or director where the ISL is attached.
An example of an exported file follows.
Exported File Example
Following is a partial exported file showing two members in a fabric.
<FabricTopology FabricWWN=”HP-10:00:08:00:88:00:21:00”>
<FabricMember WWN=”HP-10:00:08:00:88:00:21:00” DomainId=”1”>
<FabricMemberConnection OutputPort=”16” RemotePort=”4”
LinkId=”11”/>
<FabricMemberConnection OutputPort=”4” RemotePort=”12”
LinkId=”2”/>
<FabricMemberConnection OutputPort=”24” RemotePort=”8”
LinkId=”12”/>
<FabricMemberConnection OutputPort=”28” RemotePort=”4”
LinkId=”3”/>
<FabricMemberConnection OutputPort=”8” RemotePort=”8”
LinkId=”4”/>
<FabricMemberConnection OutputPort=”20” RemotePort=”4”
LinkId=”5”/>
<FabricMemberConnection OutputPort=”12” RemotePort=”20”
LinkId=”6”/>
<FabricMemberConnection OutputPort=”44” RemotePort=”0”
LinkId=”7”/>
<FabricMemberConnection OutputPort=”0” RemotePort=”0”
LinkId=”8”/>
<FabricMemberConnection OutputPort=”36” RemotePort=”4”
LinkId=”9”/>
<FabricMemberConnection OutputPort=”32” RemotePort=”0”
LinkId=”10”/>
<FabricMemberConnection OutputPort=”52” RemotePort=”4”
LinkId=”19”/>
<FabricMemberConnection OutputPort=”48” RemotePort=”4”
LinkId=”20”/>
</FabricMember>
<FabricMember WWN=”10:00:08:00:88:00:21:0A” DomainId=”11”>
<FabricMemberConnection OutputPort=”4” RemotePort=”16”
LinkId=”1”/>