FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager User Guide

Fabric Zoning
162 High Availability Fabric Manager User Guide
Activate Zone Sets
Choose the Activate Zone Set option from the Configure menu on the HAFM
menu bar to activate a zone set to control access between devices in a fabric. Only
one zone set in the fabric can be active at one time. Activating a zone set replaces
the current active zone set with the one you activate.
Note that changing the configuration for an active zone set does not dynamically
apply changes. For any change to a zone set, even modifying members in a zone
that belongs to a zone set, activate the zone set using the following steps.
Note: It is not necessary to deactivate the active zone set before activating a new zone
set.
1. Choose the Fabrics tab.
2. Choose the fabric in the Fabric Tree area for which the zone set is to be
activated.
3. Open the Activate Zone Set dialog box (Figure 69) by choosing Configure >
Activate Zone Set.
The dialog box displays all zone sets currently configured for the fabric.
Figure 69: Activate Zone Set dialog box
4. Click a zone set to select it.
5. Click Next to begin the activation.