FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager User Guide

Using the Menu Bar
72 High Availability Fabric Manager User Guide
Modify User Parameters
The Modify User dialog box (Figure 29) is used to change the password,
description, and rights for those users already configured in the HAFM.
1. In the Password field, delete the current password and enter another
password of 16 characters or less. (The password is case-sensitive.)
2. In the Confirm Password field, reenter the new password exactly as it was
entered in the Password field.
3. (Optional) In the Description field, change the description of the user (such
as employee number, department, and function) as necessary.
4. Re-assign rights to the user, using the Add and Remove buttons to display the
right in the Rights Granted list. Refer to “User Rights” on page 67 for
definitions of user rights.
By default, view rights are granted to all users.
5. Click OK to activate the administration and close the dialog box.
6. Click Close to close the Configure Users dialog box.
Delete User
Delete users from the system through the Configure Users dialog box (Figure 27
on page 69).
1. From the Configure menu, choose Users.
The Configure Users dialog box displays (Figure 27 on page 69).
2. In the User column, select the user to be deleted.
3. Click Delete.
A Warning dialog box opens confirming the deletion (Figure 30).
Figure 30: Delete User Warning
4. Click Yes to delete the user from the HAFM.
5. Click Close to close the Configure Users dialog box.