FW 05.01.00 and SW 07.02.00 hp StorageWorks HA-Fabric Manager User Guide

Using the Menu Bar
84 High Availability Fabric Manager User Guide
Test Remote Notification
Use the test remote notification feature to test the call-home feature and the
current configuration parameters for the e-mail notification feature.
■ To use this feature you must first configure telephone numbers and other
information for the Call-Home feature. In LAN-based environments, call
home event notification requires installation of Proactive Service software.
This service is offered at no additional charge for susbsystems covered under
an on-site warranty or an on-site storage hardware support contract. To
register or order Proactive Service software, contact your HP Customer
Service representative.
■ Configure Call-Home event notification through the HAFM Maintenance
menu (refer to “Configure Call-Home Event Notification” on page 86).
■ Configure e-mail through the HAFM Maintenance menu (refer to
“Configure E-Mail” on page 82).
■ Enable Call-Home event notification through the Product Manager
Maintenance menu.
Once you have run the test, you should contact the call-home recipient or the
e-mail recipient to confirm that a message was received.
1. Choose Maintenance > Test Remote Notification.
The Test Remote Notification dialog box displays (Figure 38).
Figure 38: Test Remote Notification dialog box
You can check remote notification for one or both remote communication
methods.
2. To test the call-home feature, click the Call Home check box.
3. To test the e-mail notification feature, click the E-Mail check box.