958-000289-003, March 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config

Overview24

Tools supplied by service personnel

The following tools are expected to be supplied by service personnel performing director installation

or maintenance actions. Use of the tools may be required to perform one or more test, service, or

verification tasks.

• Scissors or pocket knife—A sharp cutting edge (scissors or knife blade) may be required to cut

the protective strapping when unpacking replacement FRUs.

• Standard flat-tip and cross-tip (Phillips) screwdrivers—Screwdrivers are required to remove,

replace, adjust or tighten various FRUs, chassis, or cabinet components.

• T10 Torx

® tool—The tool is required to rack-mount the director or to remove, replace, adjust, or

tighten various chassis or cabinet components.

• Electrostatic discharge (ESD) grounding cable with attached wrist strap—Use of the ESD wrist

strap is required when working in and around the director card cage.

• Maintenance terminal (desktop or notebook PC)—The PC is required to configure director

network addresses and acquire event log information through the maintenance port. The PC

must have:

• The Microsoft

® Windows 98®, Windows

2000®, Windows 2003®, Windows XP®, or

Windows ME

® operating system installed.

• RS-232 serial communication software (such as ProComm Plus™ or HyperTerminal™)

installed. HyperTerminal is provided with Windows operating systems.

• Fiber-optic cleaning kit—The kit contains tools and instructions to clean fiber-optic cable,

connectors, loopback plugs, and protective plugs.

Optional kits

Contact your HP authorized service provider to purchase the following optional director kits. See

Table 2 for descriptions of Director 2/64 optional kits.

Table 2 Director optional kits

Supporting kit Description

HP Full Volatility License.

Part Number: A7498A

Provides a license to use Full Volatility feature.

HP Open Trunking License.

Part Number: A7505A

Provides a license to use Open Trunking feature.

HP SANtegrity Binding License.

Part Number: 317073-B21

Provides a license to use SANtegrity Binding feature.

300m Optical Transceiver Kit,

Part Number: 300834-B21

Provides short-wave optical transceiver for the

director.

10km Long Distance Optical

Transceiver Kit,

Part Number: 300835-B21

Provides 10km long-wave optical transceiver for the

director.