958-000289-003, March 2005)

Installing and configuring the director32

Table 4 Shipping carton contents for an HP 9000, HP 10000, and HP 11000 Series rack

Number Item

HP 9000, HP 10000, and HP 11000 Series Rack-Mounting Kit containing:

• Two front mounting brackets

• Two rear mounting plates

• Two rear angle brackets

2 Two shelf brackets

3 Pouch containing HP 9000, HP 10000, and HP 11000 Series rack-mounting

hardware:

• Eight 10-32 x 0.375 in Phillips panhead screws—Installs two shelf

brackets to rails

• Six 10-32 x 0.375 in Phillips panhead screws—Installs two front

mounting brackets to rails

• Four 10-32 X 0.25 in Phillips countersunk screws—Installs front

brackets to switch

• Ten 10-32 cage nuts—Secures front and rear shelf brackets.

• Four 0-32 x 0.375 in Phillips panhead screws—Installs rear

bracket sections

• Four 10-32 X 0.25 in Phillips countersunk screws—Installs rear

mounting plates to chassis

• Four 10-32 X 0.375 in Phillips panhead screws—Installs two rear

angle brackets

• Eight square alignment washers

4 One cable management assembly