958-000289-003, March 2005)

Director 2/64 installation guide 57

The Connection Description dialog box appears (Figure 31).

Figure 31 Connection Description dialog box

5. Enter 264 in the Name box and click OK.

The Connect To dialog box appears (Figure 32).

Figure 32 Connect To dialog box

6. Ensure the Connect using box displays COM1 or COM2 (depending on the serial

communication port connection to the director) and click OK.

The COMn Properties dialog box appears (Figure 33).

Figure 33 COMn Properties dialog box

7. Configure the Port Settings parameters as follows: