958-000289-003, March 2005)

Director 2/64 installation guide 63

In the example, the director’s status is operational as indicated by the green circle in the alert

panel.

Figure 40 Hardware View page

Set director date and time

The Director Element Manager log entries are stamped with the date and time received from the

director. Use these steps to set the effective date and time for the director:

NOTE: The director and HAFM synchronize at least once daily.

1. At the Hardware View, select Configure > Date/Time.

The Configure Date and Time dialog box appears (Figure 41).

2. Set director date and time manually, or set it to periodically saccharines with the HAFM. For

specific instructions, see the following sections:

• Set date and time manually, page 64