958-000289-003, March 2005)

Director 2/64 installation guide 65

Frequently used HAFM settings

This section summarizes the most common HAFM tasks including:

NOTE: For a complete reference on HAFM functionality, refer to the HAFM user guide.

• Setting the director online, page 65

• Setting the director offline, page 66

• Configuring director identification, page 66

• Configuring director management style, page 67

• Configuring switch parameters, page 67

• Configuring fabric parameters, page 70

• Configuring preferred path, page 73

• Configuring switch binding, page 73

• Configuring ports, page 73

• Configuring port addresses (FICON), page 76

• Configuring SNMP trap message recipients, page 76

• Configuring and enabling e-mail notification, page 77

• Configuring and enabling call-home features, page 79

• Configuring and enabling Ethernet events, page 79

• Configuring threshold alerts, page 79

• Configure SANtegrity Authentication dialog box, page 86

• Configuring Open Systems Management Server, page 86

• Configuring FICON Management Server, page 86

• Configuring feature key, page 86

• Configuring Open Trunking, page 86

• Enabling Embedded Web Server, page 87

• Enabling Telnet, page 87

Setting the director online

When the director is set online, an attached device can log into the director if the port is not

blocked. Attached devices can communicate with each other if they are configured in the same

zone. Use these steps to set the director online:

1. Open HAFM.

The View All - HAFM 8.6 page appears.

2. Double-click the appropriate director icon.

The Hardware View page for the selected director appears.

3. Select Maintenance > Set Online State.