958-000289-003, March 2005)

Installing and configuring the director82

NOTE: Click Previous if you need to return to the previous screen.

Figure 54 New Threshold Alerts dialog box—second screen

6. Enter a percentage from 1 through 100 for % utilization.

When throughput reaches this percentage of port capacity, a threshold alert will occur.

7. Enter the amount of cumulative minutes in which the % utilization should exist during the

notification interval before an alert is generated. The valid range is from 1 to the interval value

set in step 8.

You can also select At any time if you want an alert to occur whenever the set % utilization is

reached.

8. Enter the interval in minutes in which throughput is measured and threshold notifications can

occur. The valid range is 5 minutes to 70,560 minutes.

9. Click Next.