958-000289-003, March 2005)

Director 2/64 installation guide 91

5. If you selected Install HAFM remote client application, follow the instructions provided that

pertains to your platform.

6. After you have downloaded the installer executable, the InstallAnywhere Wizard appears.

Follow the instructions provided to continue the installation.

Launching HAFM from the remote client

Use these steps to launch HAFM from a remote client:

1. Double-click the HAFM icon to launch HAFM.

The HAFM 8.6 Log In dialog box appears (Figure 62).

NOTE: The default Windows 2000 user name is Administrator and the default password is

password. The user name and password are case-sensitive.

Figure 62 HAFM 8.6 Log In dialog box

2. Enter the HAFM appliance IP address in the Network Address box.

• The default address that appears in the Network Address box is the address of the last server

accessed.

• Click the Network Address arrow to see a list of network addresses of all HAFM appliances

that were accessed from your computer.

• If you are logging in to the local HAFM appliance, the HAFM appliance name is localhost.

• If you want to connect to an HAFM appliance that is not listed, enter the IP address in the

Network Address box.

3. Enter your user name and password in the User Name and Password boxes.

User names and passwords are case-sensitive.

4. If you want your computer to save the login information, select the Save password option.

5. Click Login.