958-000289-003, March 2005)

Director 2/64 installation guide 95

The New Firmware Version dialog box appears (Figure 65).

Figure 65 New Firmware Version dialog box

6. Select the desired firmware version file (downloaded in step 1) from the HAFM appliance

backup drive, CD-ROM drive, or hard drive.

Verify that the correct directory path and filename display in the File name box and click Save.

The New Firmware Description dialog box appears (Figure 66).

Figure 66 New Firmware Description dialog box

7. Enter a description (up to 24 characters in length) for the new firmware version and click OK.

HP recommends the description include the installation date and text that uniquely identifies the

firmware version.

A Transfer Complete message box appears indicating the new firmware version is stored on the

HAFM appliance hard drive.

8. Click Close to close the message box.

The new firmware version and associated description appear in the Director Firmware Library

dialog box.

9. Click Close.

10.To send the firmware version to a director, see ”Downloading a firmware version to a director”

on page 96.

Modifying a firmware version description

Use these steps to modify the description of a director firmware version in the library stored on the

HAFM appliance hard drive:

1. Open the HAFM application.

The View All - HAFM 8.6 main window appears.

2. Double-click the icon representing the director for which the firmware version description will be

modified.

The Hardware View page for the selected director appears.