FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUD-TE, March 2005)

Configuring the director120
9. Click Next. A new screen displays for choosing ports for the alerts, as shown in Figure 51.
Figure 51 New Threshold Alerts dialog box - third screen
10.Click either Port Type or Port List.
•For Port Type, choosing either E_Ports or F_Ports will cause this alert to generate for all ports
configured as E_Ports or F_Ports, respectively.
•For Port List, you can select individual ports when you click the check box by each port
number or set all ports. Choosing Set All Ports places a check mark by each port number.
Choosing Clear All Ports will clear the check marks by each port number.
11.Click Next. A final screen displays to provide a summary of your alert configuration, as shown
in Figure 52.
Figure 52 New Threshold Alerts dialog box - summary screen
12.Click Finish. The Configure Threshold Alerts dialog box displays listing the name, type, and
state of the alert that you just configured.