FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUD-TE, March 2005)

Director Element Manager user guide 57
Displaying FRU information
Double-click a CTP card, power supply, cooling fan module, or SBAR card in the Hardware view to
display an FRU Properties dialog box. This dialog box displays the FRU name, slot position relative
to identical FRUs installed in the chassis, active or failed state, beaconing state (CTP card and
SBAR card) part number, and serial number. For the CTP card’s dialog box, the Speed Capability
of the card displays as either 1 Gig or 2 Gig.
Figure 14 FRU Properties dialog box
NOTE: You can display a properties dialog box for all FRUs by right-clicking on the FRU and
choosing FRU Properties from the menu.
Display a Properties dialog box for a port card by right-clicking on a card and choosing FRU
Properties from the menu. To display a properties dialog box for an individual port, you must be in
the Port Card view. See ”Port Card view” on page 63 for details.
Figure 15 Port Card FRU Properties dialog box