FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUD-TE, March 2005)

Monitoring and managing the director58
Displaying director information
Double-click the director illustration, away from a hardware component, to
Figure 16 Director Properties dialog box
The following information displays in this dialog box:
• Director name, description, location, and contact configured through the Configure Identification
dialog box.
• Fibre Channel World Wide Name (WWN) identifier for the director.
• Type Number.
• Model Number.
• Manufacturer.
• Serial Number.
• Engineering change (EC) Level.
• Firmware Level.
• Management Style—Open Systems or FICON management style.
• Preferred Domain ID—This is set through the Configure Switch Parameters dialog box.
• Active Domain ID—The actual domain ID assigned to the director.
• FC Address Domain—The director’s Fibre Channel address (hexadecimal)
• Director Speed—For the Director 2/140 model, this is always 2 Gig. For the Director 2/64
model, this speed is configured through the Configure Switch Parameters dialog box and can be
either 1 Gig or 2 Gig.
• Switch Binding—Displays Enabled if the optional SANtegrity Binding features are installed
and enabled. Otherwise, displays Disabled.
You can also display the Director Properties dialog box by right-clicking the director illustration
away from an FRU and choosing Properties from the menu.