FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUD-TE, March 2005)

Director Element Manager user guide 65
• Clicking a port, port row, or port bar graph in the preceding views and choosing Port
Properties from the secondary Port menu in the Product menu on the menu bar.
Figure 23 Port Properties dialog box
The following paragraphs describe the fields in the Port Properties dialog box.
• Port Number—The physical port number.
• Port Name—User-defined port name or description. See ”Configuring ports” on page 97 for
instructions.
• Type—The type of port.
• G_Port—This displays if nothing is logged into the port.
• F_Port—This displays if a device is logged into the port.
• E_Port—This displays if the port is connected to another director’s E_Port via an ISL.
If a port is configured to be a specific port type, that configured type displays regardless of
whether the port is connected to anything or not.
• Operating Speed—This field displays the current data speed for the port as 1 Gig, 2 Gig, or
Not Established. Not Established displays if Negotiate was set for the port through
the Configure Ports dialog box and the data speed has not been resolved between the port and
the attached device, or if the port and device are not communicating.
• Fibre Channel Address—The port’s Fibre Channel address identifier.
• Port WWN—The port’s 16-digit World Wide Name (WWN).
• Attached Port WWN—The WWN of the node logged into the port.
• Block Configuration—Blocked or Unblocked. Operation can be blocked or unblocked by
one of the following methods: