958-000276-007, March 2005)

Ports may accumulate spurious events

AportmayaccumulateInvalid transmission word and Bit-Error Threshold Link Incident

events when a tran

sceiver is poorly seated, resulting in a poor ground connection.

Workaround

Reseating the optical transceiver corrects the problem.

Possible switch reset after power failure or power off sequ ence

In extremely rare instances, after a power failure or power off sequence, an edge switch

or director configuration may be reset to factory default settings. This is evident when

HAFM is unable to communicate with the edge switch or director af ter being powered

on. This condition occurs because the IP address assigned to the edge switch or director

has been reset to the factory default value (10.1.1.10).

Workaround

If this condition occurs, the con figuration of the edge switch or director must be restored,

and the IP address must be restored. Also, all licensed features need to be reactivated

by entering the license keys again.

SNMP issues

SNMP traps warmStart and coldStart are not always received across Ethernet

switches.

Workaround

None.

HP StorageWorks Director release notes