958-000281-003, March 2005)

Installation instructions14

4. Insert the torque tool into each locking Allen screw, as shown in Figure 4 for the Director 2/64

and Figure 5 for the Director 2/140. Turn each screw counter-clockwise until the spring

releases and the tool turns freely.

Figure 4 Director 2/64 UPM filler blank removal

Figure 5 Director 2/140 UPM filler blank removal

5. Pull the filler blank out and remove it from the director chassis.

1 UPM Filler Blank 2 Torque Tool