958-000281-003, March 2005)

Installation instructions22

Unblocking a UPM card

Perform the following procedure to unblock all four ports on a director UPM card.

1. Open the HAFM and log in.

The Product View appears.

2. Double-click the director icon for which the UPM card will be unblocked.

The Hardware View appears.

3. Double-click the UPM card to be unblocked.

The Port Card View for the selected card appears.

4. Move the cursor over the UPM card to be unblocked (but not over an individual port) and

right-click the mouse to open a list of menu options.

5. Select the Unblock All Ports option.

The Unblock All Ports dialog box appears, as shown in Figure 9.

Figure 9 Unblock All Ports dialog box

6. Click Yes.

The following occurs to indicate the UPM card is unblocked, and the attached devices are

online:

• Emulated green LEDs associated with all four ports are illuminated in the Port Card View.

• Green LEDs associated with all four ports are illuminated in the director.

7. Click Back to Full View to return to the Hardware View.

8. Clear the amber system error LED on the director bezel as follows:

a. Right-click the front panel bezel graphic (away from a FRU) to open a list of menu options.

b. Select the Clear System Error Light option.