FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks Universal Port Module Kit Installation Instructions (AA-RSS2E-TE/958-000281-003, March 2005)

Universal port module kit installation instructions 5
About this guide
These installation instructions provide procedures for setting up, configuring, and managing a UPM
kit in a StorageWorks Director 2/64 or a Director 2/140. They describe how to:
• Install the UPM kit.
• Test the UPM kit for proper operation.
• Contact technical support for additional assistance.
Intended audience
These instructions are intended for use by owners of the HP StorageWorks Director 2/64 or the
Director 2/140.
Related documentation
For a list of corresponding documentation included with this product, see the Related Documents
section of the HP StorageWorks Director release notes.
For the latest information, documentation, and firmware releases, please visit the HP StorageWorks
web site:
http://h18006.www1.hp.com/storage/saninfrastructure.html
.
For information about Fibre Channel standards, visit the Fibre Channel Industry Association web
site, located at
http://www.fibrechannel.org .