FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

2-50

Intrepid® 6064 Director Installation and Service Manual

Installation Tasks

Subtask A: Set Director Date and Time

The director date and time can be set manually, or set to be

periodically updated by the SAN management application (the

director and application synchronize at least once daily).

At the Hardware View, select Date/Time from the Configure menu. The

Configure Date and Time dialog box displays (Figure 2-40).

Figure 2-40 Configure Date and Time Dialog Box

Set Date and Time Manually

To set the director date and time manually:

1. At the Configure Date and Time dialog box, click the Periodic

Date/Time Synchronization check box to deselect the option (no

check mark in the box). The greyed out Date and Time fields

activate.

2. Click the Date fields that require change, and type numbers in the

following ranges:

— Month (MM): 1 through 12.

— Day (DD): 1 through 31.

— Year (YYYY): greater than 1980.

3. Click the Time fields that require change, and type numbers in the

following ranges:

— Hour (HH): 0 through 23.

— Minute (MM): 0 through 59.

— Second (SS): 0 through 59.

4. Click Activate to set the director date and time and close the

Configure Date and Time dialog box.