FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

2
Task 11: Configure the Director at the SANpilot Interface
2-83
Installation Tasks
Figure 2-63 Enter Network Password Dialog Box
4. Type the default user name and password.
NOTE: The default SANpilot interface user name is Administrator
and the default password is password. The user name and password
are case-sensitive.
5. Click OK. The SANpilot interface opens with the View panel open
and the Director page displayed (Figure 2-64).
Figure 2-64 SANpilot Interface, View Panel (Director Page)