FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

2
2-86
Intrepid® 6064 Director Installation and Service Manual
Installation Tasks
Figure 2-66 Configure BB Credits
Subtask E: Configure Director Identification
Perform this procedure to configure the director name, description,
location, and contact person. The Name, Location, and Contact
variables configured correspond respectively to the SNMP variables
sysName, sysLocation, and sysContact. These variables are used by
SNMP management workstations when obtaining data from
managed directors.
To configure the director identification:
1. At the Configure panel, click the Director tab. The Director page
displays with Identification selected (Figure 2-67).