FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Maintenance Analysis Procedures (MAPS)
3-1
3
Maintenance Analysis
Procedures (MAPS)
This chapter describes diagnostic procedures used by service
representatives to fault isolate Intrepid 6064 Director problems or
failures to the field-replaceable unit (FRU) level. The chapter
specifically describes how to perform maintenance analysis
procedures (MAPs).
Maintenance Analysis Procedures
NOTE: The screens in this manual may not match the screens on your server
and workstation. The title bars have been removed and the fields may contain
data that does not match the data seen on your system.
The MAPs provide fault isolation and related service procedures. The
procedures vary depending on the diagnostic information provided.
MAPs are step-by-step procedures that prompt service personnel for
information or describe a specific action to be performed. MAPs
provide information to interpret system events, isolate a director
failure to a single FRU, remove and replace the failed FRU, and verify
director operation.