FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
Maintenance Analysis Procedures
3-5
Maintenance Analysis Procedures (MAPS)
121 Zone set activation failed - zone set too large. Reduce size of zone
set and retry.
140 Congestion detected on an ISL. Go to MAP 0700.
141 Congestion relieved on an ISL. No action required.
142 Low BB_Credit detected on an ISL. Go to MAP 0700.
143 Low BB_Credit relieved on an ISL. No action required.
150 Zone merge failure. Go to MAP 0700.
151 Fabric configuration failure. If this event persists,
perform data
collection procedure
(Collecting
Maintenance Data on
page 4–39) and return
CD to McDATA
support personnel.
200 Power supply AC voltage failure. Go to MAP 0100.
201 Power supply DC voltage failure. Go to MAP 0100.
202 Power supply thermal failure. Go to MAP 0100.
203 Power supply AC voltage recovery. No action required.
204 Power supply DC voltage recovery. No action required.
206 Power supply removed. Replace FRU.
207 Power supply installed. No action required.
208 Power supply false shutdown. Go to MAP 0100.
300 Cooling fan propeller failed. Go to MAP 0500.
301 Cooling fan propeller failed. Go to MAP 0500.
302 Cooling fan propeller failed. Go to MAP 0500.
303 Cooling fan propeller failed. Go to MAP 0500.
304 Cooling fan propeller failed. Go to MAP 0500.
305 Cooling fan propeller failed. Go to MAP 0500.
Table 3-3 Event Codes versus Maintenance Action (continued)
Event
Code
Explanation Action