FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-20
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
NO YES
↓ Expansion port (E_Port) segmentation is indicated. Go to
step 23 to obtain event codes. If no event codes are found,
go to MAP 0700: Fabric, ISL, and Segmented Port Problem
Determination on page 3-105. Exit MAP.
A message displays indicating a link incident problem. Go to step 23
to obtain event codes. If no event codes are found, go to MAP 0600:
Port Card Failure and Link Incident Analysis on page 3-83.
Exit MAP.
22
A link incident may have occurred, but the LIN alerts option is not
enabled for the port and the attention indicator does not appear.
At the Hardware View, click Logs and select Link Incident Log. The
Link Incident Log displays (Figure 3-6).
Figure 3-6 Link Incident Log
If a link incident occurred, the affected port number is listed with one
of the following messages.
Link interface incident - implicit incident.
Link interface incident - bit-error threshold exceeded.
Link failure - loss of signal or loss of synchronization.
Link failure - not-operational primitive sequence (NOS)
received.
Link failure - primitive sequence timeout.
Link failure - invalid primitive sequence received for the
current link state.