FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-58
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
• At the Hardware View, a grey square at the alert panel, a No Link
status and reason at the Intrepid 6064 Status table, and no FRUs
visible for the director.
• At the web browser PC, A Page cannot be found, Unable to
locate the server, HTTP 404 - file not found, or similar message.
It may take up to five minutes for the link to activate at the EFCM or
SANavigator main window after the logical connection between the
director and management server or customer-supplied server is
initiated. This delay is normal.
ATTENTION! Prior to servicing a director, management server, or
customer-supplied server, determine the Ethernet LAN configuration.
Installation of directors and the server on a public customer intranet can
complicate problem determination and fault isolation.
1
Was an event code 430, 431, or 432 observed at the Intrepid 6064
Event Log or at the SANpilot event log?
YES NO
↓ Go to step 3.
2
Tabl e 3-7 lists event codes, brief explanations of the codes, and
associated steps that describe fault isolation procedures.
Table 3-7 MAP 400: Event Codes
Event
Code
Explanation Action
430 Excessive Ethernet transmit errors. Go to step 8.
431 Excessive Ethernet receive errors. Go to step 8.
432 Ethernet adapter reset. Go to step 14.