FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
MAP 0400: Loss of Server Communication
3-63
Maintenance Analysis Procedures (MAPS)
• Green Status LEDs illuminated.
Is a hub failure indicated?
YES NO
↓ Go to step 13.
12
Remove and replace the Ethernet hub. Refer to the supporting
documentation shipped with the hub for instructions.
Did hub replacement solve the problem?
NO YES
↓ The director-to-server connection is restored and appears
operational. Exit MAP.
Contact the next level of support. Exit MAP.
13
A problem with another LAN-attached device is indicated.
• If the problem is associated with another director or
management server or customer-supplied server, go to MAP
0000: Start MAP on page 3-9 to isolate the problem for that
device. Exit MAP.
• If the problem is associated with an unrelated device, notify the
customer and have the system administrator correct the
problem.
Did repair of an unrelated LAN-attached device solve the problem?
NO YES
↓ The director-to-server connection is restored and appears
operational. Exit MAP.
14
The Ethernet adapter on the director active CTP2 card reset in
response to an error. The connection to the management server or
customer-supplied server terminated briefly, then recovered upon
reset.
Perform the data collection procedure and return the CD to McDATA
for analysis. Exit MAP.