FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
MAP 0400: Loss of Server Communication
3-65
Maintenance Analysis Procedures (MAPS)
Does the customer want the second management server or
customer-supplied server configured as a client?
YES NO
↓ Power off the management server or customer-supplied
server reporting the Duplicate Session communication
problem. Exit MAP.
19
Determine the internet protocol (IP) address of the management
server or customer-supplied server running the first instance of the
SAN management application.
a. After the management server powers on and successfully
completes POSTs, the LCD panel displays a Welcome!!
message, then continuously cycles through and displays the
following operational information:
—Host name.
— System date and time.
— LAN 1 and LAN 2 IP addresses.
— Fan 1, fan 2, fan 3, and fan 4 rotational speed.
— CPU temperature.
— Hard disk capacity.
— Virtual and physical memory capacity.
b. After a few seconds, the LCD panel displays the following
(Figure 3-20):
Figure 3-20 LCD Panel (LAN 2 IP Address)
c. Depending on switch-to-server LAN connectivity, record the
appropriate IP address (LAN 1 or LAN 2).
Continue.
20
Configure the management server or customer-supplied server
reporting the Duplicate Session communication problem as a client.
LAN 2:
010.001.001.001