FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3-68

Intrepid® 6064 Director Installation and Service Manual

Maintenance Analysis Procedures (MAPS)

Figure 3-23 COMn Properties Dialog Box

h. Configure the Port Settings parameters as follows:

— Bits per second - 57600.

— Data bits - 8.

—Parity - None.

— Stop bits - 1.

— Flow control - Hardware or None.

When the parameters are set, click OK. The Intrepid 6064 -

HyperTerminal dialog box displays.

i. At the > prompt, type the user-level password (the default is

password) and press Enter. The password is case sensitive.

The Intrepid 6064 - HyperTerminal dialog box displays with a C>

prompt at the bottom of the window.

j. At the C> prompt, type ipconfig and press Enter. The Intrepid

6064 - HyperTerminal dialog box (Figure 3-24) displays with

configuration information listed, including the IP address.