FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-86
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
Figure 3-32 UPM Card Diagram (OSI)
Figure 3-33 UPM Card Diagram (FICON)
• Replace the optical transceiver with a transceiver of the same
type (shortwave or longwave).
• Perform an external loopback test for the port as part of FRU
removal and replacement (External Loopback Test
(Management Server) on page 4-32).
Did optical transceiver replacement solve the problem?
NO YES
↓ The director appears operational. Exit MAP.
7
A port card failed, and the card must be removed and replaced (RRP:
Port Module Card (UPM and XPM) on page 5-11).
• This procedure is concurrent and can be performed while
director power is on.
• Verify the location of the failed card. Figure 3-32 and Figure 3-33
show UPM card numbers (0 through15), port numbers (00
through 63), and bolded logical port addresses (hexadecimal 04
through 43).