FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

MAP 0700: Fabric, ISL, and Segmented Port Problem Determination

3-105

Maintenance Analysis Procedures (MAPS)

Figure 3-40 UPM Card Diagram (FICON)

MAP 0700: Fabric, ISL, and Segmented Port Problem

Determination

This MAP describes isolation of fabric logout, interswitch link (ISL),

and E_Port segmentation problems. Failure indicators include:

• An event code recorded at the Intrepid 6064 Event Log or the

SANpilot event log.

• A segmentation reason associated with a Fibre Channel port at

the SANpilot interface.

• A yellow triangle (attention indicator) appears over a port card

graphic or at the alert panel of the Hardware View.

• A link incident message recorded in the Link Incident Log or Port

Properties dialog box.

Was an event code 010, 011, 020, 021, 050, 051, 052, 060, 061, 062,

063, 070, 071, 072, 140, 142, or 150 observed at the Intrepid 6064

Event Log (management server) or at the SANpilot event log?

YES NO

↓ Go to step 3.