FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-106
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
2
Tabl e 3-14 lists event codes, brief explanations of the codes, and
associated steps that describe fault isolation procedures.
3
Is fault isolation being performed at the management server or
customer-supplied server?
Table 3-14 MAP 700: Event Codes
Event
Code
Explanation Action
010 Login server unable to synchronize databases. Go to step 7.
011 Login server database invalid. Go to step 7.
020 Name server unable to synchronize databases. Go to step 7.
021 Name server database invalid. Go to step 7.
050 Management server unable to synchronize databases. Go to step 8.
051 Management server database invalid. Go to step 8.
052 Management server internal error. Go to step 8.
060 Fabric controller unable to synchronize databases. Go to step 9.
061 Fabric controller database invalid. Go to step 9.
062 Maximum interswitch hop count exceeded. Go to step 10.
063 Received link state record too large. Go to step 11.
070 E_Port is segmented. Go to step 12.
071 Director is isolated. Go to step 12.
072 E_Port connected to unsupported switch. Go to step 13.
140 Congestion detected on an ISL. Go to step 21.
142 Low BB_Credit detected on an ISL. Go to step 22.
150 Zone merge failure. Go to step 23.