FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
3-109
Maintenance Analysis Procedures (MAPS)
• Event code 051 - Following CTP2 card failover, the
management server database CRC validation.
• Event code 052 - An internal operating error was detected by
the management server subsystem.
All attached devices resume operation after management server
login. Perform the data collection procedure and return the CD to
McDATA for analysis. Exit MAP.
9
A minor error occurred that caused fabric controller databases to be
re-initialized to an empty state. As a result, the director briefly lost
interswitch link capability. The following list explains the errors.
• Event code 060 - Following CTP2 card reset, the fabric
controller attempted to acquire a database copy from the other
CTP2 card and failed.
• Event code 061 - Following CTP2 card failover, the fabric
controller database failed CRC validation.
All interswitch links resume operation after CTP2 card reset or
failover. Perform the data collection procedure and return the CD to
McDATA for analysis. Exit MAP.
10
The Fabric Controller software detected a path to another director (or
fabric element) in a multiswitch fabric that traverses more than three
interswitch links (hops). Fibre Channel frames may persist in the
fabric longer than timeout values allow.
Advise the customer of the problem and work with the system
administrator to reconfigure the fabric so the path between any two
fabric elements does not traverse more than three hops.
Did fabric reconfiguration solve the problem?
NO YES
↓ The director and multiswitch fabric appear operational.
Exit MAP.
Contact the next level of support. Exit MAP.
11
The Fabric Controller software detected an:
• Intrepid 6064 Director in a multiswitch fabric that has more than
48 ISLs attached.