FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-112
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
Figure 3-41 Configure Fabric Parameters Dialog Box
e. Type the recommended E_D_TOV and R_A_TOV values, then
click Activate.
f. Repeat step d and step e at the Hardware View for the director
attached to the segmented E_Port (second director). Use the
same E_D_TOV and R_A_TOV values.
g. Set both directors or switches online (Set the Director Online or
Offline on page 4-43).
Did the operating parameter change solve the problem and did both
directors join through the ISL to form a fabric?
NO YES
↓ The directors, associated ISL, and multiswitch fabric appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.
15
A director E_Port segmented because two fabric elements had
duplicate domain IDs.
a. Work with the system administrator to determine the desired
domain ID (1 through 31 inclusive) for each director or switch.
b. Notify the customer both directors or switches will set offline.
Ensure the system administrator quiesces Fibre Channel frame
traffic through the directors or switches, and sets attached
devices offline.