FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
3-115
Maintenance Analysis Procedures (MAPS)
Figure 3-44 Zoning Dialog Box (Active Zone Set Tab)
f. Inspect zone names in the active zone set to determine the
incompatible name.
g. Modify the incompatible zone name as directed by the customer:
1. At the Zoning dialog box, click the Zone Library tab. The
dialog box returns to the Zone Library page (Figure 3-43).
2. At the Zones field, right-click the zone name to be changed. A
pop-up menu appears.
3. Select the Rename option from the menu. The selected zone
name remains highlighted in blue. Type the new zone name
(specified by the customer), then click OK to activate the
change and close the Zoning dialog box.
Did the zone name change solve the problem and did both director or
switches join through the ISL to form a fabric?
NO YES
↓ The director, associated ISL, and multiswitch fabric appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.