FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

3
3-128
Intrepid® 6064 Director Installation and Service Manual
Maintenance Analysis Procedures (MAPS)
3. After a few seconds, the LCD panel displays the following
message pertaining to boot sequence selection
(Figure 3-50):
Figure 3-50 LCD Panel During Boot Sequence
4. Ignore the message. After ten seconds, the server performs
the boot sequence from BIOS. During the boot sequence, the
server performs additional POSTs and displays the following
operational information at the LCD panel:
•Host name.
• System date and time.
• LAN 1 and LAN 2 IP addresses.
• Fan 1, fan 2, fan 3, and fan 4 rotational speed.
• CPU temperature.
• Hard disk capacity.
• Virtual and physical memory capacity.
d. After successful POST completion, the LCD panel displays a
Welcome!! message, then continuously cycles through and
displays server operational information.
e. After rebooting the server at the LCD panel, log on to the
management server Windows 2000 desktop through a LAN
connection to a browser-capable PC (Access the Management
Server Desktop on page 2-26). The SAN management
application starts and the EFCM Log In or SANavigator Log In
dialog box displays (Figure 3-49).
f. At the EFCM Log In or SANavigator Log In dialog box, type a
user name and password, and click Login. The SAN
management application opens and the EFCM or SANavigator
main window displays (Figure 3-4).
Did the main window display and does the SAN management
application appear operational?
NO YES
↓ The server appears operational. Exit MAP.
Boot from LAN?
Press <Enter>